From cc268b5cd54dfc490eec26e91be33a22762e9046 Mon Sep 17 00:00:00 2001 From: bzi Date: Mon, 18 Feb 2019 20:18:30 +0100 Subject: [PATCH] Initial commit of FW source files --- esp_sensor_firmware/.gitignore | 1 + esp_sensor_firmware/esp_sensor_firmware.ino | 173 ++++++++++++++++++ .../mqtt_credentials.h.example | 17 ++ 3 files changed, 191 insertions(+) create mode 100644 esp_sensor_firmware/.gitignore create mode 100644 esp_sensor_firmware/esp_sensor_firmware.ino create mode 100644 esp_sensor_firmware/mqtt_credentials.h.example diff --git a/esp_sensor_firmware/.gitignore b/esp_sensor_firmware/.gitignore new file mode 100644 index 0000000..e4d405d --- /dev/null +++ b/esp_sensor_firmware/.gitignore @@ -0,0 +1 @@ +mqtt_credentials.h diff --git a/esp_sensor_firmware/esp_sensor_firmware.ino b/esp_sensor_firmware/esp_sensor_firmware.ino new file mode 100644 index 0000000..8a699bd --- /dev/null +++ b/esp_sensor_firmware/esp_sensor_firmware.ino @@ -0,0 +1,173 @@ +/* ESP 8266 environmental sensor FW + * + * This firmware provides features to use the NodeMCU ESP12 unit as an environmental sensor. + * Currently supported is the DHT22 temperature and humidity sensor. + * The sensor is to be connected to pin D2 of the NodeMCU ESP12 breakout card pin. + * + * (C) 2019 Macrocell - Environmental sensing solutions + * proudly presented by Macrocell - FPGA Innovators + */ + +#include +#include +#include +#include "DHT.h" +#include "mqtt_credentials.h" + +#define ID_BASE "sensor/window/" +#define ID_TEMP ID_BASE "/temperature" +#define ID_HUMID ID_BASE "/temperature" +#define ID_HEAT ID_BASE "/temperature" + +#define OPERATION_BLINK_EN true // blink continously if in correct operation + +#define DHTPIN 4 // Digital pin connected to the DHT sensor +#define DHTTYPE DHT22 // DHT 22 (AM2302), AM2321 +DHT dht(DHTPIN, DHTTYPE); + +WiFiClient espClient; +PubSubClient client(espClient); + +void setup() { + Serial.begin(115200); + pinMode(LED_BUILTIN, OUTPUT); + digitalWrite(LED_BUILTIN, LOW); + setup_wifi(); + client.setServer(mqtt_server, mqtt_port); + dht.begin(); +} + +void setup_wifi() { + delay(10); + // Connect to a WiFi network + Serial.println(); + Serial.print("Connecting to "); + Serial.println(wifi_ssid); + + WiFi.begin(wifi_ssid, wifi_password); + WiFi.mode(WIFI_STA); + + // blink LED fast until WiFi is connected + while (WiFi.status() != WL_CONNECTED) { + delay(200); + digitalWrite(LED_BUILTIN, HIGH); + Serial.print("."); + delay(200); + digitalWrite(LED_BUILTIN, LOW); + } + + // WiFi connected + Serial.println(""); + Serial.println("WiFi connected"); + Serial.println("IP address: "); + Serial.println(WiFi.localIP()); +} + +void reconnect() { + // Loop until reconnected + while (!client.connected()) { + Serial.print("Attempting MQTT connection..."); + // Attempt to connect + if (client.connect("ESP8266Client", mqtt_user, mqtt_password)) { + Serial.println("connected"); + } else { + Serial.print("failed, rc="); + Serial.print(client.state()); + Serial.println(" try again in 5 seconds"); + digitalWrite(LED_BUILTIN, HIGH); + // Wait 5 seconds before retrying + delay(4000); + digitalWrite(LED_BUILTIN, LOW); + delay(1000); + } + } +} + +bool checkBound(float newValue, float prevValue, float maxDiff) { + return !isnan(newValue) && + (newValue < prevValue - maxDiff || newValue > prevValue + maxDiff); +} + +long lastMsg = 0; +float t_r = 0.0; +float h_r = 0.0; +float hi_r = 0.0; +long lastSent = 0; +bool published = false; +bool forcePublish = false; + +void loop() { + if (!client.connected()) { + reconnect(); + } + client.loop(); + digitalWrite(LED_BUILTIN, HIGH); + + long now = millis(); + if (now - lastMsg > 2500) { + if (OPERATION_BLINK_EN) {digitalWrite(LED_BUILTIN, LOW);} + } + if (now - lastMsg > 5000) { + lastMsg = now; + if (OPERATION_BLINK_EN) {digitalWrite(LED_BUILTIN, HIGH);} + + float h = dht.readHumidity(); + float t = dht.readTemperature(); + + if (isnan(h) || isnan(t)) { + Serial.println(F("Failed to read from DHT sensor!")); + return; + } + + float hi = dht.computeHeatIndex(t, h, false); + + + Serial.print(F("Humidity: ")); + Serial.print(h); + Serial.print(F("% Temperature: ")); + Serial.print(t); + Serial.print(F("°C Heat index: ")); + Serial.print(hi); + Serial.println(F("°C ")); + + published = false; + if (lastSent > 12) { + Serial.println(F("Forcing a publish of all values")); + forcePublish = true; + lastSent = 0; + } + + if (checkBound(t, t_r, 0.3) or forcePublish) { + t_r = t; + Serial.print("New temperature:"); + Serial.println(String(t).c_str()); + client.publish(ID_TEMP, String(t).c_str(), true); + published = true; + } + + if (checkBound(h, h_r, 2.5) or forcePublish) { + h_r = h; + Serial.print("New humidity:"); + Serial.println(String(h).c_str()); + client.publish(ID_HUMID, String(h).c_str(), true); + published = true; + } + + + if (checkBound(hi, hi_r, 0.2) or forcePublish) { + hi_r = hi; + Serial.print("New heat index:"); + Serial.println(String(hi).c_str()); + client.publish(ID_HEAT, String(hi).c_str(), true); + published = true; + } + + if (published == false) { + lastSent = lastSent + 1; + } else { + lastSent = 0; + } + + forcePublish = false; + } +} diff --git a/esp_sensor_firmware/mqtt_credentials.h.example b/esp_sensor_firmware/mqtt_credentials.h.example new file mode 100644 index 0000000..d7385de --- /dev/null +++ b/esp_sensor_firmware/mqtt_credentials.h.example @@ -0,0 +1,17 @@ +/* ESP 8266 environmental sensor FW + * + * This header provides the necessary credentials for the esp_sensor_firmware.ino file. + * Before compilation, add your credentials and remove the .example postfix from the filename. + * ** WARNING ** DO NOT COMMIT YOUR mqtt_credentials.h FILE CONTAINING YOUR ACTUAL CREDENTIALS. + * + * (C) 2019 Macrocell - Environmental sensing solutions + * proudly presented by Macrocell - FPGA Innovators + */ + +#define wifi_ssid "macrocell_iot" +#define wifi_password "ExamplePassword" + +#define mqtt_server "192.168.x.x" +#define mqtt_port 1883 +#define mqtt_user "your_username" +#define mqtt_password "your_password"