From 2619fe1301f7b3cf8b80313a49446e670d90132a Mon Sep 17 00:00:00 2001 From: Markus Koch Date: Sun, 14 Jan 2018 19:22:58 +0100 Subject: [PATCH] doc: Fix typo --- doc/tiny-xo2-documentation.tex | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/doc/tiny-xo2-documentation.tex b/doc/tiny-xo2-documentation.tex index 41e039c..6c1a015 100644 --- a/doc/tiny-xo2-documentation.tex +++ b/doc/tiny-xo2-documentation.tex @@ -100,7 +100,7 @@ bibencoding=utf8 \tableofcontents \chapter{Introduction} -The Tiny-XO2 is a small, versatile and cost-effective development platform for the Lattice MachXO2 \acp{fpga}. +The Tiny-XO2 is a small, versatile and cost-effective development platform for Lattice MachXO2 \acp{fpga}. In addition to the \ac{fpga}, it provides a \ac{usb} to \ac{uart} converter and a crystal to include the basic set of components for any \ac{fpga} design. @@ -202,7 +202,7 @@ Additionally, the \ac{rx} and \ac{tx} lines have an \ac{led} connected in parall \label{crystal} The board features a 12 MHz crystal oscillator. It supplies the clock to the \ac{usb}-to-\ac{uart} converter and is also connected to pin \texttt{28} of the \ac{fpga}. If the 12 MHz clock signal is not needed on the \ac{fpga}, resistor \texttt{R2} can be removed to free pin \texttt{28} as a general purpose \ac{io} pin. A higher frequency for the design can be generated using the \ac{pll} inside the \ac{fpga}. -\hwmod{If another base frequency is required, the crystal oscillator on the back (\texttt{U4}) can be exchanged with another value. \textbf{The CH340G \ac{usb}-to-\ac{uart} coverter will stop working in this configuration} and needs to be removed from the board.} +\hwmod{If another base frequency is required, the crystal oscillator on the back (\texttt{U4}) can be exchanged with another value. \textbf{The CH340G \ac{usb}-to-\ac{uart} converter will stop working in this configuration} and needs to be removed from the board.} \section{\acs{io} Headers} \label{ioheaders}