8fec7fbc8b
fw: Fix rotary input
...
Accidentally disabled pull-ups instead of enabling them.
2020-08-08 17:27:49 +02:00
c4c6446d16
sw: Implement rotary encoder for volume
2020-08-08 17:27:17 +02:00
577ba83a58
fw: Render display immediately after the last byte has been received
2020-08-08 16:54:51 +02:00
87b3bf280f
fw: Adapt I/O pins to new hardware
2020-08-08 16:54:23 +02:00
c6ff3c4923
fw: Add proper battery level thresholds
2020-08-08 16:53:48 +02:00
4276e9a9cf
sw: Connect to localhost
2020-08-08 16:53:11 +02:00
f369f88899
sw: Implement preliminary key press handlers
2020-08-08 16:52:57 +02:00
b92eb13f76
sw: Add delay_usecs to avoid packet loss for slow SPI commands
2020-08-08 16:51:54 +02:00
c3bca0eba6
sw: Increase I/O timings
2020-08-08 16:49:31 +02:00
cec6bd2c0b
des: Do not wait for SBC at boot
...
Waiting here may cause the controller to "freeze" in an
active state, draining the battery.
2020-07-31 20:49:40 +02:00
17b911ff8e
cfg: Add raspi config.txt
2020-07-31 19:18:48 +02:00
1b1d3a14d6
fw: Invert polarity of SBCMON pin
2020-07-31 19:18:26 +02:00
6ae88b0101
fw: Implement SBC controls
2020-07-31 19:07:11 +02:00
a396052487
fw: Implement power-on battery check
2020-07-31 18:23:58 +02:00
b4cfb40bb7
fw: Fix battery voltage calculation
2020-07-31 18:23:39 +02:00
0e5e87af7c
fw: Export post() PM function
2020-07-30 21:42:09 +02:00
eed5435335
fw: Implement main loop scheduler
2020-07-30 21:41:50 +02:00
e4afc61eba
fw: Remove unused variable
2020-07-30 21:41:32 +02:00
86b6b0897a
fw: Fix debouncing for rotary encoder
2020-07-30 21:41:22 +02:00
ba069861ff
fw: Implement better battery voltage monitoring
2020-07-30 21:40:57 +02:00
e26471381a
fw: Implement power management
2020-07-30 20:05:09 +02:00
9e9e2ff5c4
fw: Implement battery voltage readout
2020-07-30 17:11:48 +02:00
475c9cdd4a
fw: Fix noisy picture?
...
Had noise artifacts on the OLED display... and for some reason,
this commit fixes it. But, I mean, WTF?!
2020-07-30 16:23:23 +02:00
1eaa9c3c38
Introduce I/O transactions at a slower clock speed
2020-07-28 21:55:33 +02:00
c618e058dd
Return switch and decoder values over SPI
2020-07-28 21:54:20 +02:00
09bc6979e9
Implement switches and rotary encoder
2020-07-27 21:39:29 +02:00
f71c65106f
fw: Only update display if a full frame was received
...
Sometimes, the RPi fails to send out a message in time, leading
to two, back-to-back SPI transactions. The beginning of the second
is then lost in the long lcd_display() call. By applying this
patch, we now miss the incomplete frame entirely, but at least we
don't display garbage on the screen. Just looks like stutter.
The real solution would be to fix in on the Linux / Python side,
but this workaround is better than nothing for now.
2020-07-19 21:20:30 +02:00
633d2d0fe2
fw: Implement display output
2020-07-19 18:40:44 +02:00
69cb74b8dc
sw: Increase framerate to 25 fps
2020-07-19 18:39:16 +02:00
a618fff822
sw: Implement SPI transmissions
2020-07-19 18:39:01 +02:00
a8d947544b
sw: Allow empty duration
2020-07-19 18:38:06 +02:00
7efac00348
sw: Allow empty artist
2020-07-19 18:37:48 +02:00
1cbc6063d6
Merge branch 'master' of git.notsyncing.net:electronics/webradio
2020-07-19 16:18:33 +02:00
368ceb4373
Fix jumpy text
...
Fixes #2 .
2020-07-13 18:10:48 +02:00
61a1ae5dc8
Add firmware template
2020-07-11 12:41:08 +02:00
eb968ec16f
Return image data fram get_image()
2020-07-05 20:09:31 +02:00
56b1f3c6e4
Query MPD every 500 ms
2020-07-05 20:06:20 +02:00
a95b140164
Remove zombie function
2020-07-05 20:06:05 +02:00
c43bfe425e
Improve bar layout
2020-07-05 19:42:30 +02:00
a3f12aa96b
Prerender text and blit to correct position
...
Fixes #1 .
2020-07-05 19:31:07 +02:00
34592b6060
Add initial display renderer
2020-07-05 17:45:52 +02:00
c47ce44a44
Initial commit
2020-07-05 17:42:40 +02:00
