mirror of
				https://bitbucket.org/C_Classic/prgkbd.git
				synced 2025-11-03 21:02:06 +01:00 
			
		
		
		
	
		
			
				
	
	
		
			163 lines
		
	
	
		
			6.7 KiB
		
	
	
	
		
			Makefile
		
	
	
	
	
	
			
		
		
	
	
			163 lines
		
	
	
		
			6.7 KiB
		
	
	
	
		
			Makefile
		
	
	
	
	
	
# Name: Makefile
 | 
						|
# Project: hid-mouse example
 | 
						|
# Author: Christian Starkjohann / edited by C_Classic
 | 
						|
# Creation Date: 2008-04-07 / 2011-28-10
 | 
						|
# Tabsize: 4
 | 
						|
# Copyright: (c) 2008 by OBJECTIVE DEVELOPMENT Software GmbH
 | 
						|
# License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
 | 
						|
# This Revision: $Id: Makefile 692 2008-11-07 15:07:40Z cs $
 | 
						|
 | 
						|
DEVICE  = atmega8
 | 
						|
F_CPU   = 16000000	# in Hz
 | 
						|
FUSE_L  = # see below for fuse values for particular devices
 | 
						|
FUSE_H  = # DISABLED!!! FUSES SET BELOW
 | 
						|
AVRDUDE = avrdude -c usbasp -p $(DEVICE) # edit this line for your programmer
 | 
						|
 | 
						|
CFLAGS  = -Iusbdrv -I. -DDEBUG_LEVEL=0
 | 
						|
OBJECTS = usbdrv/usbdrv.o usbdrv/usbdrvasm.o usbdrv/oddebug.o lib/prgKeyboard.o lib/uart.o keyboard.o debug.o main.o
 | 
						|
 | 
						|
COMPILE = avr-gcc -Wall -Os -DF_CPU=$(F_CPU) $(CFLAGS) -mmcu=$(DEVICE)
 | 
						|
 | 
						|
##############################################################################
 | 
						|
# Fuse values for particular devices
 | 
						|
##############################################################################
 | 
						|
# If your device is not listed here, go to
 | 
						|
# http://palmavr.sourceforge.net/cgi-bin/fc.cgi
 | 
						|
# and choose options for external crystal clock and no clock divider
 | 
						|
#
 | 
						|
################################## ATMega8 ##################################
 | 
						|
# ATMega8 FUSE_L (Fuse low byte):
 | 
						|
# 0x9f = 1 0 0 1   1 1 1 1
 | 
						|
#        ^ ^ \ /   \--+--/
 | 
						|
#        | |  |       +------- CKSEL 3..0 (external >8M crystal)
 | 
						|
#        | |  +--------------- SUT 1..0 (crystal osc, BOD enabled)
 | 
						|
#        | +------------------ BODEN (BrownOut Detector enabled)
 | 
						|
#        +-------------------- BODLEVEL (2.7V)
 | 
						|
# ATMega8 FUSE_H (Fuse high byte):
 | 
						|
# 0xc9 = 1 1 0 0   1 0 0 1 <-- BOOTRST (boot reset vector at 0x0000)
 | 
						|
#        ^ ^ ^ ^   ^ ^ ^------ BOOTSZ0
 | 
						|
#        | | | |   | +-------- BOOTSZ1
 | 
						|
#        | | | |   + --------- EESAVE (don't preserve EEPROM over chip erase)
 | 
						|
#        | | | +-------------- CKOPT (full output swing)
 | 
						|
#        | | +---------------- SPIEN (allow serial programming)
 | 
						|
#        | +------------------ WDTON (WDT not always on)
 | 
						|
#        +-------------------- RSTDISBL (reset pin is enabled)
 | 
						|
#
 | 
						|
############################## ATMega48/88/168 ##############################
 | 
						|
# ATMega*8 FUSE_L (Fuse low byte):
 | 
						|
# 0xdf = 1 1 0 1   1 1 1 1
 | 
						|
#        ^ ^ \ /   \--+--/
 | 
						|
#        | |  |       +------- CKSEL 3..0 (external >8M crystal)
 | 
						|
#        | |  +--------------- SUT 1..0 (crystal osc, BOD enabled)
 | 
						|
#        | +------------------ CKOUT (if 0: Clock output enabled)
 | 
						|
#        +-------------------- CKDIV8 (if 0: divide by 8)
 | 
						|
# ATMega*8 FUSE_H (Fuse high byte):
 | 
						|
# 0xde = 1 1 0 1   1 1 1 0
 | 
						|
#        ^ ^ ^ ^   ^ \-+-/
 | 
						|
#        | | | |   |   +------ BODLEVEL 0..2 (110 = 1.8 V)
 | 
						|
#        | | | |   + --------- EESAVE (preserve EEPROM over chip erase)
 | 
						|
#        | | | +-------------- WDTON (if 0: watchdog always on)
 | 
						|
#        | | +---------------- SPIEN (allow serial programming)
 | 
						|
#        | +------------------ DWEN (debug wire enable)
 | 
						|
#        +-------------------- RSTDISBL (reset pin is enabled)
 | 
						|
#
 | 
						|
############################## ATTiny25/45/85 ###############################
 | 
						|
# ATMega*5 FUSE_L (Fuse low byte):
 | 
						|
# 0xef = 1 1 1 0   1 1 1 1
 | 
						|
#        ^ ^ \+/   \--+--/
 | 
						|
#        | |  |       +------- CKSEL 3..0 (clock selection -> crystal @ 12 MHz)
 | 
						|
#        | |  +--------------- SUT 1..0 (BOD enabled, fast rising power)
 | 
						|
#        | +------------------ CKOUT (clock output on CKOUT pin -> disabled)
 | 
						|
#        +-------------------- CKDIV8 (divide clock by 8 -> don't divide)
 | 
						|
# ATMega*5 FUSE_H (Fuse high byte):
 | 
						|
# 0xdd = 1 1 0 1   1 1 0 1
 | 
						|
#        ^ ^ ^ ^   ^ \-+-/ 
 | 
						|
#        | | | |   |   +------ BODLEVEL 2..0 (brownout trigger level -> 2.7V)
 | 
						|
#        | | | |   +---------- EESAVE (preserve EEPROM on Chip Erase -> not preserved)
 | 
						|
#        | | | +-------------- WDTON (watchdog timer always on -> disable)
 | 
						|
#        | | +---------------- SPIEN (enable serial programming -> enabled)
 | 
						|
#        | +------------------ DWEN (debug wire enable)
 | 
						|
#        +-------------------- RSTDISBL (disable external reset -> enabled)
 | 
						|
#
 | 
						|
################################ ATTiny2313 #################################
 | 
						|
# ATTiny2313 FUSE_L (Fuse low byte):
 | 
						|
# 0xef = 1 1 1 0   1 1 1 1
 | 
						|
#        ^ ^ \+/   \--+--/
 | 
						|
#        | |  |       +------- CKSEL 3..0 (clock selection -> crystal @ 12 MHz)
 | 
						|
#        | |  +--------------- SUT 1..0 (BOD enabled, fast rising power)
 | 
						|
#        | +------------------ CKOUT (clock output on CKOUT pin -> disabled)
 | 
						|
#        +-------------------- CKDIV8 (divide clock by 8 -> don't divide)
 | 
						|
# ATTiny2313 FUSE_H (Fuse high byte):
 | 
						|
# 0xdb = 1 1 0 1   1 0 1 1
 | 
						|
#        ^ ^ ^ ^   \-+-/ ^
 | 
						|
#        | | | |     |   +---- RSTDISBL (disable external reset -> enabled)
 | 
						|
#        | | | |     +-------- BODLEVEL 2..0 (brownout trigger level -> 2.7V)
 | 
						|
#        | | | +-------------- WDTON (watchdog timer always on -> disable)
 | 
						|
#        | | +---------------- SPIEN (enable serial programming -> enabled)
 | 
						|
#        | +------------------ EESAVE (preserve EEPROM on Chip Erase -> not preserved)
 | 
						|
#        +-------------------- DWEN (debug wire enable)
 | 
						|
 | 
						|
 | 
						|
# symbolic targets:
 | 
						|
help:
 | 
						|
	@echo "This Makefile has no default rule. Use one of the following:"
 | 
						|
	@echo "make hex ....... to build main.hex"
 | 
						|
	@echo "make program ... to flash fuses and firmware"
 | 
						|
	@echo "make fuse ...... to flash the fuses"
 | 
						|
	@echo "make flash ..... to flash the firmware (use this on metaboard)"
 | 
						|
	@echo "make clean ..... to delete objects and hex file"
 | 
						|
 | 
						|
hex: main.hex
 | 
						|
 | 
						|
program: flash fuse
 | 
						|
 | 
						|
# rule for programming fuse bits:
 | 
						|
fuse:
 | 
						|
	$(AVRDUDE) -U lfuse:w:0x3f:m -U hfuse:w:0xc1:m
 | 
						|
 | 
						|
# rule for uploading firmware:
 | 
						|
flash: main.hex
 | 
						|
	$(AVRDUDE) -U flash:w:main.hex:i
 | 
						|
 | 
						|
# rule for deleting dependent files (those which can be built by Make):
 | 
						|
clean:
 | 
						|
	rm -f main.hex main.lst main.obj main.cof main.list main.map main.eep.hex main.elf *.o usbdrv/*.o lib/*.o main.s usbdrv/oddebug.s usbdrv/usbdrv.s
 | 
						|
 | 
						|
# Generic rule for compiling C files:
 | 
						|
.c.o:
 | 
						|
	$(COMPILE) -c $< -o $@
 | 
						|
 | 
						|
# Generic rule for assembling Assembler source files:
 | 
						|
.S.o:
 | 
						|
	$(COMPILE) -x assembler-with-cpp -c $< -o $@
 | 
						|
# "-x assembler-with-cpp" should not be necessary since this is the default
 | 
						|
# file type for the .S (with capital S) extension. However, upper case
 | 
						|
# characters are not always preserved on Windows. To ensure WinAVR
 | 
						|
# compatibility define the file type manually.
 | 
						|
 | 
						|
# Generic rule for compiling C to assembler, used for debugging only.
 | 
						|
.c.s:
 | 
						|
	$(COMPILE) -S $< -o $@
 | 
						|
 | 
						|
# file targets:
 | 
						|
 | 
						|
# Since we don't want to ship the driver multipe times, we copy it into this project:
 | 
						|
usbdrv:
 | 
						|
	cp -r ../../../usbdrv .
 | 
						|
 | 
						|
main.elf: usbdrv $(OBJECTS)	# usbdrv dependency only needed because we copy it
 | 
						|
	$(COMPILE) -o main.elf $(OBJECTS)
 | 
						|
 | 
						|
main.hex: main.elf
 | 
						|
	rm -f main.hex main.eep.hex
 | 
						|
	avr-objcopy -j .text -j .data -O ihex main.elf main.hex
 | 
						|
	avr-size main.hex
 | 
						|
 | 
						|
# debugging targets:
 | 
						|
 | 
						|
disasm:	main.elf
 | 
						|
	avr-objdump -d main.elf
 | 
						|
 | 
						|
cpp:
 | 
						|
	$(COMPILE) -E main.c
 |