vfdboard/bootloader/Makefile.inc

368 lines
12 KiB
PHP
Raw Normal View History

2018-01-13 09:57:30 +01:00
# Name: Makefile.inc
# Project: USBaspLoader (updater)
# Author: Stephan B<>rwolf
# Creation Date: 2012-09-01
# Tabsize: 4
# License: GNU GPL v2 (see License.txt)
F_CPU = 16000000
DEVICE = atmega8
# where the updating firmware should be located (starting address)
FLASHADDRESS = 0x0000
# use any fix (ATxmega compatible) crc32, uncomment to disable feature or set automatically with value "0"
;UPDATECRC32 = 0
# some MCU independent defines...
#...will be extended within MCU dependend configuration below...
DEFINES += -DCONFIG_NO__CHIP_ERASE -DCONFIG_NO__ONDEMAND_PAGEERASE -DCONFIG_NO__PRESERVE_WATCHDOG
# have the bootloader always enter the programming mode
;DEFINES += -DCONFIG_HAVE__BOOTLOADER_ALWAYSENTERPROGRAMMODE
# have the bootloader exit itself after around 3 seconds (@16MHz) inactivity
;DEFINES += -DCONFIG_BOOTLOADER_LOOPCYCLES_TIMEOUT=16 -DCONFIG_HAVE__BOOTLOADER_ABORTTIMEOUTONACT
# save the PROG button on the layout (CAREFUL - read feature description first)
;DEFINES += -DCONFIG_HAVE__BOOTLOADER_IGNOREPROGBUTTON
# some MCUs with small BLS (bootloader section) need to deactivate some
# features in order to fit into BLS.
# If this option is enabled, also essential features may become deactivated
# Esp. you MUST ensure not to have watchdog initially enabled when using this!
DANGEROUS=0
# PROGRAMMER contains AVRDUDE options to address your programmer
# PROGRAMMER = -c pony-stk200
PROGRAMMER = -c usbasp
# since USBaspLoader supports HAVE_BLB11_SOFTW_LOCKBIT...
LOCKOPT = -U lock:w:0x3f:m
#untested devices (WARNING: may destroy ISP ability!)
#device always should select maximum bootloader-section size
#please mail tests-reports to matrixstorm@gmx.de
#
#some features may be deactivated to fit into bootloader section
#ATTANTION: CONFIG_NO... feature deactivation may not be optimal!
FUSEOPT_8535 = -U lfuse:w:0x1f:m -U hfuse:w:0xc0:m
BOOTLOADER_ADDRESS_8535 = 0x1800
DEFINES_8535 = -DCONFIG_USE__EXCESSIVE_ASSEMBLER -DCONFIG_NO__NEED_WATCHDOG -DCONFIG_NO__PRECISESLEEP
FUSEOPT_16 = -U lfuse:w:0x1f:m -U hfuse:w:0xc0:m
BOOTLOADER_ADDRESS_16 = 0x3800
DEFINES_16 = -DCONFIG_USE__EXCESSIVE_ASSEMBLER -DCONFIG_NO__NEED_WATCHDOG -DCONFIG_NO__PRECISESLEEP
ifeq ($(F_CPU), 12000000)
DEFINES_16 += -DCONFIG_NO__HAVE_READ_LOCK_FUSE
endif
FUSEOPT_88 = -U lfuse:w:0xd7:m -U hfuse:w:0xd4:m -U efuse:w:0xf8:m
BOOTLOADER_ADDRESS_88 = 0x1800
DEFINES_88 = -DCONFIG_USE__EXCESSIVE_ASSEMBLER -DCONFIG_NO__NEED_WATCHDOG -DCONFIG_NO__PRECISESLEEP -DCONFIG_NO__HAVE_READ_LOCK_FUSE
FUSEOPT_164 = -U lfuse:w:0xd7:m -U hfuse:w:0xd0:m -U efuse:w:0xfc:m
BOOTLOADER_ADDRESS_164 = 0x3800
DEFINES_164 = -DCONFIG_USE__EXCESSIVE_ASSEMBLER -DCONFIG_NO__NEED_WATCHDOG -DCONFIG_NO__PRECISESLEEP -DCONFIG_NO__FLASH_BYTE_READACCESS -DCONFIG_NO__HAVE_READ_LOCK_FUSE
ifeq ($(F_CPU), 12000000)
DEFINES_164 += -DCONFIG_NO__BOOTLOADER_CAN_EXIT
endif
FUSEOPT_324 = $(FUSEOPT_164)
BOOTLOADER_ADDRESS_324 = 0x7000
DEFINES_324 = #-DEMPTY
FUSEOPT_128 = -U lfuse:w:0x1f:m -U hfuse:w:0xc0:m -U efuse:w:0xfd:m
BOOTLOADER_ADDRESS_128 = 0x1E000
DEFINES_128 = -D__AVR_LIBC_DEPRECATED_ENABLE__
FUSEOPT_640 = -U lfuse:w:0xd7:m -U hfuse:w:0xd0:m -U efuse:w:0xfc:m
BOOTLOADER_ADDRESS_640 = 0xE000
DEFINES_640 = #-DEMPTY
FUSEOPT_1280 = $(FUSEOPT_640)
BOOTLOADER_ADDRESS_1280 = 0x1E000
DEFINES_1280 = #-DEMPTY
FUSEOPT_1281 = $(FUSEOPT_1280)
BOOTLOADER_ADDRESS_1281 = 0x1E000
DEFINES_1281 = #-DEMPTY
FUSEOPT_2561 = $(FUSEOPT_1281)
BOOTLOADER_ADDRESS_2561 = 0x3E000
DEFINES_2561 = #-DEMPTY
#tested devices
# standard atmega8 needs BODLEVEL to be programed, since it is a 5V device
# you may also want to UNprogram SUT1 to get a SLOWER bootup (lfuse then would be 0x3f)
FUSEOPT_8 = -U lfuse:w:0x1f:m -U hfuse:w:0xc0:m
BOOTLOADER_ADDRESS_8 = 0x1800
DEFINES_8 = -DCONFIG_USE__EXCESSIVE_ASSEMBLER -DCONFIG_NO__NEED_WATCHDOG -DCONFIG_NO__PRECISESLEEP
FUSEOPT_32 = $(FUSEOPT_16)
BOOTLOADER_ADDRESS_32 = 0x7000
DEFINES_32 = #-DEMPTY
FUSEOPT_162 = -U lfuse:w:0xff:m -U hfuse:w:0x90:m -U efuse:w:0xf9:m
BOOTLOADER_ADDRESS_162 = 0x3800
DEFINES_162 = -DCONFIG_USE__EXCESSIVE_ASSEMBLER -DCONFIG_NO__NEED_WATCHDOG -DCONFIG_NO__PRECISESLEEP -DCONFIG_NO__HAVE_READ_LOCK_FUSE
ifeq ($(F_CPU), 12000000)
DEFINES_162 += -DCONFIG_NO__BOOTLOADER_CAN_EXIT
endif
FUSEOPT_168 = $(FUSEOPT_88)
BOOTLOADER_ADDRESS_168 = 0x3800
DEFINES_168 = -DCONFIG_USE__EXCESSIVE_ASSEMBLER -DCONFIG_NO__NEED_WATCHDOG -DCONFIG_NO__PRECISESLEEP -DCONFIG_NO__FLASH_BYTE_READACCESS -DCONFIG_NO__HAVE_READ_LOCK_FUSE
FUSEOPT_328 = -U lfuse:w:0xd7:m -U hfuse:w:0xd0:m -U efuse:w:0x04:m
BOOTLOADER_ADDRESS_328 = 0x7000
DEFINES_328 = #-DEMPTY
FUSEOPT_644 = $(FUSEOPT_324)
BOOTLOADER_ADDRESS_644 = 0xE000
DEFINES_644 = #-DEMPTY
FUSEOPT_1284 = -U lfuse:w:0xd7:m -U hfuse:w:0xd0:m -U efuse:w:0xfc:m
BOOTLOADER_ADDRESS_1284 = 0x1E000
DEFINES_1284 = #-DEMPTY
FUSEOPT_2560 = $(FUSEOPT_1280)
BOOTLOADER_ADDRESS_2560 = 0x3E000
DEFINES_2560 = #-DEMPTY
#http://www.nongnu.org/avr-libc/user-manual/using_tools.html
#autoselect logic
ifeq ($(DEVICE), atmega8535)
FUSEOPT = $(FUSEOPT_8535)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_8535)
MCUARCH = avr4
DEFINES += $(DEFINES_8535)
else ifeq ($(DEVICE), atmega8)
FUSEOPT = $(FUSEOPT_8)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_8)
MCUARCH = avr4
DEFINES += $(DEFINES_8)
else ifeq ($(DEVICE), atmega16)
FUSEOPT = $(FUSEOPT_16)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_16)
MCUARCH = avr5
DEFINES += $(DEFINES_16)
else ifeq ($(DEVICE), atmega32)
FUSEOPT = $(FUSEOPT_32)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_32)
MCUARCH = avr5
DEFINES += $(DEFINES_32)
else ifeq ($(DEVICE), atmega88)
FUSEOPT = $(FUSEOPT_88)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_88)
MCUARCH = avr4
DEFINES += $(DEFINES_88)
else ifeq ($(DEVICE), atmega88a)
FUSEOPT = $(FUSEOPT_88)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_88)
MCUARCH = avr4
DEFINES += $(DEFINES_88)
else ifeq ($(DEVICE), atmega88p)
FUSEOPT = $(FUSEOPT_88)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_88)
MCUARCH = avr4
DEFINES += $(DEFINES_88)
else ifeq ($(DEVICE), atmega88pa)
FUSEOPT = $(FUSEOPT_88)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_88)
MCUARCH = avr4
DEFINES += $(DEFINES_88)
else ifeq ($(DEVICE), atmega162)
FUSEOPT = $(FUSEOPT_162)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_162)
MCUARCH = avr5
DEFINES += $(DEFINES_162)
else ifeq ($(DEVICE), atmega164a)
FUSEOPT = $(FUSEOPT_164)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_164)
MCUARCH = avr5
DEFINES += $(DEFINES_164)
else ifeq ($(DEVICE), atmega164p)
FUSEOPT = $(FUSEOPT_164)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_164)
MCUARCH = avr5
DEFINES += $(DEFINES_164)
else ifeq ($(DEVICE), atmega164pa)
FUSEOPT = $(FUSEOPT_164)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_164)
MCUARCH = avr5
DEFINES += $(DEFINES_164)
else ifeq ($(DEVICE), atmega168)
FUSEOPT = $(FUSEOPT_168)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_168)
MCUARCH = avr5
DEFINES += $(DEFINES_168)
else ifeq ($(DEVICE), atmega168a)
FUSEOPT = $(FUSEOPT_168)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_168)
MCUARCH = avr5
DEFINES += $(DEFINES_168)
else ifeq ($(DEVICE), atmega168p)
FUSEOPT = $(FUSEOPT_168)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_168)
MCUARCH = avr5
DEFINES += $(DEFINES_168)
else ifeq ($(DEVICE), atmega168pa)
FUSEOPT = $(FUSEOPT_168)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_168)
MCUARCH = avr5
DEFINES += $(DEFINES_168)
else ifeq ($(DEVICE), atmega324a)
FUSEOPT = $(FUSEOPT_324)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_324)
MCUARCH = avr5
DEFINES += $(DEFINES_324)
else ifeq ($(DEVICE), atmega324p)
FUSEOPT = $(FUSEOPT_324)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_324)
MCUARCH = avr5
DEFINES += $(DEFINES_324)
else ifeq ($(DEVICE), atmega324pa)
FUSEOPT = $(FUSEOPT_324)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_324)
MCUARCH = avr5
DEFINES += $(DEFINES_324)
else ifeq ($(DEVICE), atmega328)
FUSEOPT = $(FUSEOPT_328)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_328)
MCUARCH = avr5
DEFINES += $(DEFINES_328)
else ifeq ($(DEVICE), atmega328p)
FUSEOPT = $(FUSEOPT_328)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_328)
MCUARCH = avr5
DEFINES += $(DEFINES_328)
else ifeq ($(DEVICE), atmega640)
FUSEOPT = $(FUSEOPT_640)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_640)
MCUARCH = avr5
DEFINES += $(DEFINES_640)
else ifeq ($(DEVICE), atmega644)
FUSEOPT = $(FUSEOPT_644)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_644)
MCUARCH = avr5
DEFINES += $(DEFINES_644)
else ifeq ($(DEVICE), atmega644a)
FUSEOPT = $(FUSEOPT_644)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_644)
MCUARCH = avr5
DEFINES += $(DEFINES_644)
else ifeq ($(DEVICE), atmega644p)
FUSEOPT = $(FUSEOPT_644)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_644)
MCUARCH = avr5
DEFINES += $(DEFINES_644)
else ifeq ($(DEVICE), atmega644pa)
FUSEOPT = $(FUSEOPT_644)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_644)
MCUARCH = avr5
DEFINES += $(DEFINES_644)
else ifeq ($(DEVICE), atmega128)
FUSEOPT = $(FUSEOPT_128)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_128)
MCUARCH = avr51
DEFINES += $(DEFINES_128)
else ifeq ($(DEVICE), atmega1280)
FUSEOPT = $(FUSEOPT_1280)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_1280)
MCUARCH = avr51
DEFINES += $(DEFINES_1280)
else ifeq ($(DEVICE), atmega1281)
FUSEOPT = $(FUSEOPT_1281)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_1281)
MCUARCH = avr51
DEFINES += $(DEFINES_1281)
else ifeq ($(DEVICE), atmega1284)
FUSEOPT = $(FUSEOPT_1284)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_1284)
MCUARCH = avr51
DEFINES += $(DEFINES_1284)
else ifeq ($(DEVICE), atmega1284p)
FUSEOPT = $(FUSEOPT_1284)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_1284)
MCUARCH = avr51
DEFINES += $(DEFINES_1284)
else ifeq ($(DEVICE), atmega2560)
FUSEOPT = $(FUSEOPT_2560)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_2560)
MCUARCH = avr6
DEFINES += $(DEFINES_2560)
else ifeq ($(DEVICE), atmega2561)
FUSEOPT = $(FUSEOPT_2561)
BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS_2561)
MCUARCH = avr6
DEFINES += $(DEFINES_2561)
else
FUSEOPT = unknown
endif
NEW_BOOTLOADER_ADDRESS = $(BOOTLOADER_ADDRESS)
# Tools:
AVRPATH = $(AVR8TOOLCHAINBINDIR)
AVRDUDE = $(AVRDUDEBINDIR)avrdude $(PROGRAMMER) -p $(DEVICE)
ECHO=@echo
GCC=@gcc
MAKE=@make
RM=@rm -f
CC=@$(AVRPATH)avr-gcc
OBC=@$(AVRPATH)avr-objcopy
OBD=@$(AVRPATH)avr-objdump
SIZ=@$(AVRPATH)avr-size