140 lines
6.1 KiB
Plaintext
140 lines
6.1 KiB
Plaintext
This is the README file for USBaspLoader.
|
|
|
|
USBaspLoader is a USB boot loader for AVR microcontrollers. It can be used on
|
|
most AVRs with at least 2 kB of boot loader section, e.g. the popular ATMega8.
|
|
The firmware is flashed into the bootloader-section of the flash memory and
|
|
takes control immediately after reset. If a certain hardware condition is met
|
|
(this condition can be configured, e.g. a jumper), the boot loader waits for
|
|
data on the USB interface and loads it into the remaining part of the flash
|
|
memory. If the condition is not met, control is passed to the loaded firmware.
|
|
|
|
This boot loader is similar to Thomas Fischl's avrusbboot and our own
|
|
bootloadHID, but it requires no separate command line tool to upload the data.
|
|
USBaspLoader emulates Thomas Fischl's USBasp programmer instead. You can thus
|
|
use AVRDUDE to upload flash memory data (and if the option is enabled) EEPROM
|
|
data.
|
|
|
|
Since USBaspLoader cooperates with AVRDUDE, it can be used in conjunction with
|
|
the Arduino software to upload flash memory data.
|
|
|
|
|
|
FILES IN THE DISTRIBUTION
|
|
=========================
|
|
Readme.txt ........ The file you are currently reading.
|
|
firmware .......... Source code of the controller firmware.
|
|
firmware/usbdrv ... USB driver -- See Readme.txt in that directory for info
|
|
updater ........... Source code of an updater-firmware exchanging bootloaders
|
|
License.txt ....... Public license (GPL2) for all contents of this project.
|
|
Schematics.txt .... File giving infos about default and recommended hw-layout.
|
|
|
|
*_usbasploader.hex precompiled USBaspLoader for default layout and settings
|
|
|
|
|
|
BUILDING AND INSTALLING
|
|
=======================
|
|
This project can be built on Unix (Linux, FreeBSD or Mac OS X) or Windows.
|
|
|
|
For all platforms, you must first describe your hardware and layout
|
|
specific parameters (PINs to use, etc...) in "firmware/bootloaderconfig.h".
|
|
Some USB tuning is possible by modifying "firmware/usbconfig.h".
|
|
All files provide working default settings, which can be used as an example.
|
|
Then edit "Makefile.inc" (NEVER any Makefile directly!) to reflect
|
|
the target device, and some feature set departing from the default one.
|
|
(You also can edit "firmware/bootloaderconfig.h" to change feature set
|
|
and therefore memory space requirements).
|
|
Since now "Makefile.inc" has an automatic selection logic based on
|
|
the type of the microcontroller, there is NO need for setting bootloader-
|
|
addresses, lock- or fusebits anymore...
|
|
|
|
Building on Windows:
|
|
You need WinAVR for the firmware, see http://winavr.sourceforge.net/.
|
|
To build the firmware with WinAVR, change into the "USBaspLoader" directory,
|
|
check whether you need to edit the files mentioned above (e.g. change device
|
|
settings, programmer hardware, clock rate etc.) and type "make" to compile
|
|
the complete source code.
|
|
After you upload the code to the device with "make flash", you should set
|
|
the fuses with "make fuse".
|
|
|
|
If you already have some working USBaspLoader on your controller, you can
|
|
use "make update" to flash the "updater"-firmware to it.
|
|
After starting this firmware on the microcontroller it will replace the
|
|
old bootloader with the new one just compiled.
|
|
The update-feature can be used on boards, where HVPP or ISP is not possible
|
|
after production anymore. (Or you just want to save trouble laying out ISP.)
|
|
Therefore you also could implement the "HAVE_SPMINTEREFACE_MAGICVALUE"-
|
|
feature, protecting your board from wrong updates for other boards.
|
|
|
|
At default configuration the bootloader protects itself from overwriting
|
|
itself. In order to sustain the new update-capability, no lock bits
|
|
("make lock") should be programmed after uploading the firmware and
|
|
programming the fuse bits.
|
|
|
|
|
|
Building on Unix (Linux, FreeBSD and Mac):
|
|
You need the GNU toolchain and avr-libc for the firmware. See
|
|
http://www.nongnu.org/avr-libc/user-manual/install_tools.html
|
|
for a good description on how to install the GNU compiler toolchain and
|
|
avr-libc on Unix. For Mac OS X, we provide a read-made package, see
|
|
http://www.obdev.at/avrmacpack/
|
|
|
|
To build the firmware, change to the "USBaspLoader" directory, edit the
|
|
files mentioned above if you need to change settings (as also described in
|
|
the Windows paragraph above) and type "make" to compile the source code.
|
|
After you upload the code to the device with "make flash", you should
|
|
set the fuses with "make fuse".
|
|
As described within the Windows paragraph, "make update" can also
|
|
be used instead.
|
|
|
|
WORKING WITH THE BOOT LOADER
|
|
============================
|
|
The boot loader is quite easy to use. Set the jumper (or whatever condition
|
|
you have configured) for boot loading on the target hardware, connect it to
|
|
the host computer and (if not bus powered) issue a Reset on the AVR.
|
|
|
|
You can now flash the device with AVRDUDE through a "virtual" USBasp
|
|
programmer.
|
|
|
|
|
|
ABOUT THE LICENSE
|
|
=================
|
|
It is our intention to make our USB driver and this demo application
|
|
available to everyone. Moreover, we want to make a broad range of USB
|
|
projects and ideas for USB devices available to the general public. We
|
|
therefore want that all projects built with our USB driver are published
|
|
under an Open Source license. Our license for the USB driver and demo code is
|
|
the GNU General Public License Version 2 (GPL2). See the file "License.txt"
|
|
for details.
|
|
|
|
If you don't want to publish your source code under the GPL2, you can simply
|
|
pay money for AVR-USB. As an additional benefit you get USB PIDs for free,
|
|
licensed exclusively to you. See the file "CommercialLicense.txt" in the usbdrv
|
|
directory for details.
|
|
|
|
|
|
MORE INFORMATION
|
|
================
|
|
For questions, reports, suggestions or just for fun please contact
|
|
Stephan Baerwolf (matrixstorm@gmx.de) and/or visit demonstration-board
|
|
for USBaspLoader at
|
|
|
|
http://matrixstorm.com/avr/tinyusbboard/
|
|
|
|
|
|
For more information about Objective Development's firmware-only USB driver
|
|
for Atmel's AVR microcontrollers please visit the URL
|
|
|
|
http://www.obdev.at/products/avrusb/
|
|
|
|
A technical documentation of the driver's interface can be found in the
|
|
file "firmware/usbdrv/usbdrv.h".
|
|
|
|
|
|
--
|
|
recent version:
|
|
(c) 2013 by Stephan Baerwolf
|
|
matrixstorm@gmx.de
|
|
|
|
initial version:
|
|
(c) 2008 by OBJECTIVE DEVELOPMENT Software GmbH.
|
|
http://www.obdev.at/
|