fpga/mor1kx-bemicrocv
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

Compare commits

base: fpga:9ff74212428e334fa14fc0f15ca8e271e97b1947
Branches Tags
fpga:master
..
compare: fpga:b01f74648e91da85bcdee7bcd04de1935f33e28b
Branches Tags
fpga:master

No commits in common. "9ff74212428e334fa14fc0f15ca8e271e97b1947" and "b01f74648e91da85bcdee7bcd04de1935f33e28b" have entirely different histories.
9ff7421242 ... b01f74648e

4 changed files with 20 additions and 77 deletions
Show Stats Expand all files Collapse all files

26
bench/bench_flashrom_controller.vhd
View File

@ -37,7 +37,7 @@ architecture rtl of bench_flashrom_controller is
signal sync_stb : std_logic;
signal load_stb : std_logic;
signal status_update_stb : std_logic;
signal status : std_logic_vector(7 downto 0);
signal status : std_logic_vector(31 downto 0);
signal info : std_logic_vector(31 downto 0);
signal data_in : std_logic_vector(7 downto 0);
signal data_in_valid : std_logic;
@ -50,7 +50,6 @@ architecture rtl of bench_flashrom_controller is
signal spi_cs_n : std_logic;
signal spi_wp_n : std_logic;
signal spi_busy : std_logic;
signal spi_clk_cnt : integer := 0;
begin
DataFlash_inst : entity work.DataFlash
@ -58,7 +57,7 @@ begin
flashmemory => "devicemodels/memory.txt",
Rapid_interface => true,
fsck => 66,
DEVICE => "AT45DB011D", --AT45DB011D
DEVICE => "AT45DB011D",
Tsck => 13.6 ns)
port map(
SI => spi_si,
@ -116,30 +115,9 @@ begin
wait until (rising_edge(clk));
-- bench code here
wait until ready = '1';
strobe(load_stb);
wait until ready = '1';
strobe(load_stb);
wait until ready = '1';
strobe(status_update_stb);
wait until ready = '1';
strobe(status_update_stb);
wait until ready = '1';
strobe(status_update_stb);
wait until ready = '1';
strobe(load_stb);
wait;
end process bench;
spiclkcounter : process is
begin
wait until spi_sck = '1';
spi_clk_cnt <= spi_clk_cnt + 1;
end process spiclkcounter;
end architecture rtl;

62
cores/flashrom-wb/flashrom_controller.vhd
View File

@ -16,7 +16,7 @@ entity flashrom_controller is
sync_stb : in std_logic; -- Synchronize current memory page with chip, only sampled when ready
load_stb : in std_logic; -- Load page into local buffer, only sampled when ready
status_update_stb : in std_logic; -- Update status vector
status : out std_logic_vector(7 downto 0); -- value of the status register (update using status_update_stb)
status : out std_logic_vector(31 downto 0); -- value of the status register (update using status_update_stb)
info : out std_logic_vector(31 downto 0); -- value of the information register (updated on reset)
-- Data IF
@ -40,7 +40,7 @@ architecture RTL of flashrom_controller is
constant max_dummy_bits : integer := 16;
constant bootup_delay : integer := 4000;
type state_t is (INIT, GETINFO, GETSTATUS, IDLE);
type state_t is (INIT, GETINFO, IDLE);
signal state : state_t;
signal spif_data_in_valid : std_logic;
@ -59,7 +59,7 @@ begin
flashrom_spi_inst : entity work.flashrom_spi
generic map(
clk_divider => 4,
clk_divider => 2,
max_word_length => spif_max_word_length,
max_dummy_bits => max_dummy_bits)
port map(
@ -82,13 +82,11 @@ begin
flashrom_controller_p : process(clk, rst) is
variable temp_cnt : integer range 0 to bootup_delay;
variable done : boolean;
procedure default_state is
begin
spi_reset_n <= '1';
spif_data_in_valid <= '0';
done := false;
end procedure default_state;
procedure reset_state is
@ -105,29 +103,6 @@ begin
temp_cnt := 0;
end procedure reset_state;
procedure run_command_single(constant data_in_length : integer; constant data_out_length : integer; constant data_out_dummy_bits : integer; constant nTxWords : integer; constant data_in : std_logic_vector(31 downto 0)) is
begin
spif_data_in_length <= data_in_length;
spif_data_out_length <= data_out_length;
spif_data_out_dummy_bits <= data_out_dummy_bits;
spif_data_in_valid <= '1';
spif_data_in <= data_in;
if temp_cnt = nTxWords then
spif_data_in_valid <= '0';
elsif spif_data_next = '1' then
temp_cnt := temp_cnt + 1;
end if;
if spif_data_out_valid = '1' then
spif_data_in_valid <= '0';
done := true;
state <= IDLE;
temp_cnt := 0;
end if;
end procedure run_command_single;
begin
if rst = '1' then
reset_state;
@ -145,27 +120,24 @@ begin
else
temp_cnt := temp_cnt + 1;
end if;
when GETINFO => -- TODO: In simulation I can only call this command once?!
run_command_single(8, 32, 8, 5, FLASHROM_COMMAND_MANUFACTURER_ID & padBits(spif_data_in, FLASHROM_COMMAND_MANUFACTURER_ID));
if done then
info <= spif_data_out;
when GETINFO =>
spif_data_in_length <= 8; -- Other bits after OpCode are don't care, so just repeat OPC
spif_data_out_length <= 32;
spif_data_out_dummy_bits <= 8;
spif_data_in_valid <= '1';
spif_data_in <= FLASHROM_COMMAND_MANUFACTURER_ID & padBits(spif_data_in, FLASHROM_COMMAND_MANUFACTURER_ID);
if spif_data_out_valid = '1' then
info <= spif_data_out;
state <= IDLE;
end if;
when IDLE =>
temp_cnt := 0;
if status_update_stb = '1' then
state <= GETSTATUS;
end if;
if load_stb = '1' then --debug only
state <= GETINFO;
end if;
when GETSTATUS =>
run_command_single(8, 8, 16, 3, FLASHROM_COMMAND_GET_STATUS & padBits(spif_data_in, FLASHROM_COMMAND_GET_STATUS));
if done then
status <= spif_data_out(7 downto 0);
if temp_cnt = 5 then
spif_data_in_valid <= '0';
elsif spif_data_next = '1' then
temp_cnt := temp_cnt + 1;
end if;
when IDLE => null;
end case;
end if;
end if;
end process flashrom_controller_p;
ready <= '1' when state = IDLE else '0';
end architecture RTL;

1
cores/flashrom-wb/flashrom_pkg.vhd
View File

@ -5,7 +5,6 @@ use ieee.numeric_std.all;
package flashrom_pkg is
constant FLASHROM_ADDR_WIDTH : integer := 12;
constant FLASHROM_COMMAND_MANUFACTURER_ID : std_logic_vector(7 downto 0) := x"9F";
constant FLASHROM_COMMAND_GET_STATUS : std_logic_vector(7 downto 0) := x"D7";
function padBits(target : std_logic_vector; other : std_logic_vector) return std_logic_vector;
end package flashrom_pkg;

8
cores/flashrom-wb/flashrom_spi.vhd
View File

@ -87,20 +87,14 @@ begin
bitCounter <= 0;
bitCounterIn <= 0;
data_in_length_i <= 0;
pseudoEdge <= true;
pseudoEdge <= true;
end if;
ckDiv <= 0;
when TX =>
if ckDiv = clk_divider - 2 or pseudoEdge then
ckDiv <= 0;
if not pseudoEdge then
spi_sck <= not spi_sck;
end if;
if spi_sck = '0' and bitCounter = data_in_length_i and data_in_valid = '0' then
-- Prevent last clock cycle (make it a "passive" one)
spi_sck <= '0';
pseudoEdge <= true;
end if;
if spi_sck = '1' or pseudoEdge then -- falling edge -> provide data
if bitCounter = data_in_length_i then
bitCounter <= 0;