// (C) 2001-2015 Altera Corporation. All rights reserved.
// Your use of Altera Corporation's design tools, logic functions and other 
// software and tools, and its AMPP partner logic functions, and any output 
// files any of the foregoing (including device programming or simulation 
// files), and any associated documentation or information are expressly subject 
// to the terms and conditions of the Altera Program License Subscription 
// Agreement, Altera MegaCore Function License Agreement, or other applicable 
// license agreement, including, without limitation, that your use is for the 
// sole purpose of programming logic devices manufactured by Altera and sold by 
// Altera or its authorized distributors.  Please refer to the applicable 
// agreement for further details.


// $File: //acds/rel/15.1/ip/avalon_st/altera_avalon_st_pipeline_stage/altera_avalon_st_pipeline_base.v $
// $Revision: #1 $
// $Date: 2015/08/09 $
// $Author: swbranch $
//------------------------------------------------------------------------------

`timescale 1ns / 1ns

module altera_avalon_st_pipeline_base (
                                       clk,
                                       reset,
                                       in_ready,
                                       in_valid,
                                       in_data,
                                       out_ready,
                                       out_valid,
                                       out_data
                                       );

   parameter  SYMBOLS_PER_BEAT  = 1;
   parameter  BITS_PER_SYMBOL   = 8;
   parameter  PIPELINE_READY    = 1;
   localparam DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL;
   
   input clk;
   input reset;
   
   output in_ready;
   input  in_valid;
   input [DATA_WIDTH-1:0] in_data;
   
   input                  out_ready;
   output                 out_valid;
   output [DATA_WIDTH-1:0] out_data;
   
   reg                     full0;
   reg                     full1;
   reg [DATA_WIDTH-1:0]    data0;
   reg [DATA_WIDTH-1:0]    data1;

   assign out_valid = full1;
   assign out_data  = data1;    
   
   generate if (PIPELINE_READY == 1) 
     begin : REGISTERED_READY_PLINE
        
        assign in_ready  = !full0;

        always @(posedge clk, posedge reset) begin
           if (reset) begin
              data0 <= {DATA_WIDTH{1'b0}};
              data1 <= {DATA_WIDTH{1'b0}};
           end else begin
              // ----------------------------
              // always load the second slot if we can
              // ----------------------------
              if (~full0)
                data0 <= in_data;
              // ----------------------------
              // first slot is loaded either from the second,
              // or with new data
              // ----------------------------
              if (~full1 || (out_ready && out_valid)) begin
                 if (full0)
                   data1 <= data0;
                 else
                   data1 <= in_data;
              end
           end
        end
        
        always @(posedge clk or posedge reset) begin
           if (reset) begin
              full0    <= 1'b0;
              full1    <= 1'b0;
           end else begin
              // no data in pipeline
              if (~full0 & ~full1) begin
                 if (in_valid) begin
                    full1 <= 1'b1;
                 end
              end // ~f1 & ~f0

              // one datum in pipeline 
              if (full1 & ~full0) begin
                 if (in_valid & ~out_ready) begin
                    full0 <= 1'b1;
                 end
                 // back to empty
                 if (~in_valid & out_ready) begin
                    full1 <= 1'b0;
                 end
              end // f1 & ~f0
              
              // two data in pipeline 
              if (full1 & full0) begin
                 // go back to one datum state
                 if (out_ready) begin
                    full0 <= 1'b0;
                 end
              end // end go back to one datum stage
           end
        end

     end 
   else 
     begin : UNREGISTERED_READY_PLINE
	
	// in_ready will be a pass through of the out_ready signal as it is not registered
	assign in_ready = (~full1) | out_ready;
	
	always @(posedge clk or posedge reset) begin
	   if (reset) begin
	      data1 <= 'b0;
	      full1 <= 1'b0;
	   end
	   else begin
	      if (in_ready) begin
		 data1 <= in_data;
		 full1 <= in_valid;
	      end
	   end
	end		
     end
   endgenerate
endmodule