Initial commit

This commit is contained in:
Markus Koch 2021-08-27 20:10:47 +02:00
commit 85f3a3021a

25
README.MD Normal file
View File

@ -0,0 +1,25 @@
# Trashernet
Trashernet is a very trashy Ethernet stack for FPGAs written in VHDL aiming to cover all OSI layers:
* Layer 1, Physical: `trashernet_phy`
* Layer 2, Data link: `trashernet_mac`
When writing it, the following were the main design philosophies:
1. Standards are nice and all, but this, it just needs to work.
2. Hardware is expensive, LOC are not. So let's do everything we can inside the FPGA.
3. If there's a feature that feels optional even though it isn't, it is. See 1. if in doubt.
**IMPORTANT:** This code (and HW suggestions) violate the Ethernet standard in many ways. Do not use in proper (especially commercial) products.
## Hardware
TBD. TL;DR:
* RX: Use resistors behind Ethernet magnetics to reduce Ethernet RX voltage levels (0 +-2.5V) to LVPECL voltage levels (1.65V +-400mV). Or LVDS if your FPGA can't handle LVPECL.
* TX: Meh, a series current limiting resistor is good enough.
## License
This Source Code Form is subject to the terms of the Mozilla Public License, v. 2.0.