Markus Koch
b66134f097
Merge branch 'feature/bootloader'
2024-03-10 12:32:34 +01:00
Markus Koch
812c7e3327
fw: Implement initial firmware
2024-03-10 12:29:40 +01:00
Markus Koch
6e47b25a90
boot: Add bootloader
2024-02-04 09:58:40 +01:00
Markus Koch
3ffd686b57
kicad: Adjust silkscreen on digital board
2022-09-11 16:33:24 +02:00
Markus Koch
f09442925f
kicad: Add .5 mm slack to all joints on either side
...
The changes are only on the aux board as this board touches every
other board. It is enough to add tolerances to one side of the joint,
so this one was the obvious choice. The .5 mm change on each edge adds
up to a slack of 1 mm per joint. Fingers crossed it's enough.
2022-09-11 14:28:59 +02:00
Markus Koch
37898b3bba
kicad: Migrate to KiCad 6
2022-01-04 08:35:08 +01:00
Markus Koch
cc7620acab
kicad: Complete initial layout for all
2021-08-22 17:50:21 +02:00
Markus Koch
9bb40ddf69
kicad: power: Fix LED positioning + PCB outline
2021-07-25 12:01:15 +02:00
Markus Koch
123ecb379e
kicad: Fix switch and interconnect layout
2021-07-24 20:15:56 +02:00
Markus Koch
74eb316a36
kicad: aux: Perform initial placement
2021-07-08 14:55:35 +02:00
Markus Koch
dc71c98fd2
kicad: digital: Improve layout
...
Also add another bypass cap to the AVR, which entailed
a re-annotation of the entire schematic.
2021-07-08 12:48:35 +02:00
Markus Koch
b442f61383
kicad: digital: Perform initial placement
2021-07-04 16:21:37 +02:00
Markus Koch
a078dc5201
kicad: power: Adjust outline to new peg layout
2021-07-04 12:25:59 +02:00
Markus Koch
fd1d859765
kicad: aux: Rework peg layout
2021-07-04 12:23:24 +02:00
Markus Koch
01dd100fc6
kicad: power: Layout the rest
2021-06-12 19:30:27 +02:00
Markus Koch
185e753f0d
kicad: power: Layout most parts
2021-06-06 21:38:42 +02:00
Markus Koch
608c81df7d
kicad: power: Label SMPS power traces
2021-06-06 18:18:38 +02:00
Markus Koch
f0cfc53958
kicad: Swap edge conn position of chg_act and vled_en
2021-06-06 18:18:13 +02:00
Markus Koch
36617fada9
Place components for power board
2021-06-06 17:57:51 +02:00
Markus Koch
5bf0f8c1c6
Associate and create remaining footprints
2021-06-06 12:13:28 +02:00
Markus Koch
2a125a782d
Associate most footprints
2021-03-14 18:54:22 +01:00
Markus Koch
c070a39b6e
Annotate schematic
2021-03-14 18:43:58 +01:00
Markus Koch
5ab806a230
Increase VCPU bulk capacitance
2021-03-14 18:34:00 +01:00
Markus Koch
ee81405a04
Add pin-reduced version of edgecon
2021-03-14 14:36:53 +01:00
Markus Koch
e962f2d7bf
Add board-to-board connections
2021-03-14 14:36:35 +01:00
Markus Koch
60930aaf5a
Add edge connector footprint
2021-03-14 09:50:08 +01:00
Markus Koch
fde561406f
Exchange USB-C socket with USB-micro-B
...
I want a 100% SMD part to avoid holes in the board, and
was not able to find an entirely SMD type-C connector.
2021-03-14 09:49:38 +01:00
Markus Koch
be4b3bd46b
Add preliminary PCB outlines
2021-03-07 11:01:43 +01:00
Markus Koch
f5f70e1d2d
Symlink sub-assembly projects
2021-03-07 11:01:23 +01:00
Markus Koch
c7dba16a1c
Create initial schematics
2021-03-06 21:52:29 +01:00
Markus Koch
ba2a78dc06
Add README
2021-03-06 10:43:35 +01:00