A simple 6-sided die with LEDs.
Go to file
Markus Koch f09442925f kicad: Add .5 mm slack to all joints on either side
The changes are only on the aux board as this board touches every
other board. It is enough to add tolerances to one side of the joint,
so this one was the obvious choice. The .5 mm change on each edge adds
up to a slack of 1 mm per joint. Fingers crossed it's enough.
2022-09-11 14:28:59 +02:00
kicad kicad: Add .5 mm slack to all joints on either side 2022-09-11 14:28:59 +02:00
README.md Add README 2021-03-06 10:43:35 +01:00

README.md

LED Die

A simple 6-sided die with LEDs.