Prepare AVR and ESP FW for EnviSens

This commit is contained in:
bzi 2019-02-21 23:03:40 +01:00
parent 20341ffa17
commit d5e0be2f94
4 changed files with 238 additions and 1 deletions

View File

@ -26,6 +26,13 @@ float hmid = 0; // humidity
float temp = 0; // temperature float temp = 0; // temperature
float heat = 0; // heat index float heat = 0; // heat index
float airq = 0; // air quality / gas float airq = 0; // air quality / gas
#define NUM_SENSORS 4
float sensor_values[NUM_SENSORS];
char sensor_names[NUM_SENSORS][5] = {"hmid", "temp", "heat", "airq"};
int current_value_index = 0;
volatile byte* float_ptr;
void setup() { void setup() {
Serial.begin(SERIAL_BAUDRATE); Serial.begin(SERIAL_BAUDRATE);
@ -38,7 +45,23 @@ void setup() {
} }
void requestEvent() { void requestEvent() {
Wire.write("he1234"); byte i2c_data[8];
float_ptr = (byte*) &sensor_values[current_value_index];
i2c_data[0] = byte(sensor_names[current_value_index][0]);
i2c_data[1] = byte(sensor_names[current_value_index][1]);
i2c_data[2] = byte(sensor_names[current_value_index][2]);
i2c_data[3] = byte(sensor_names[current_value_index][3]);
i2c_data[4] = float_ptr[0];
i2c_data[5] = float_ptr[1];
i2c_data[6] = float_ptr[2];
i2c_data[7] = float_ptr[3];
Wire.write(i2c_data, 8);
if (current_value_index < NUM_SENSORS - 1) {
current_value_index ++;
} else {
current_value_index = 0;
}
} }
void loop() { void loop() {
@ -70,5 +93,11 @@ void loop() {
Serial.print("AirQuality: "); Serial.print("AirQuality: ");
Serial.print(airq); Serial.print(airq);
Serial.println(" PPM"); Serial.println(" PPM");
// set the sensor values for global access
sensor_values[0] = hmid;
sensor_values[1] = temp;
sensor_values[2] = heat;
sensor_values[3] = airq;
} }
} }

View File

@ -0,0 +1 @@
configuration.h

View File

@ -0,0 +1,26 @@
/* ESP8266 environmental sensor project
This header provides the necessary credentials for the esp_sensor_firmware.ino file.
Before compilation, add your credentials and remove the .example postfix from the filename.
* ** WARNING ** DO NOT COMMIT YOUR configuration.h FILE CONTAINING YOUR ACTUAL CREDENTIALS.
(C) 2019 Macrocell - Environmental sensing solutions
proudly presented by Macrocell - FPGA Innovators
*/
#define sensor_id "YOUR_SENSOR_ID"
#define wifi_ssid "YOUR_SSID"
#define wifi_password "YOUR_WIFI_PW"
#define mqtt_server "192.168.x.x"
#define mqtt_port 1883
#define mqtt_user "YOUR_MQTT_USER"
#define mqtt_password "YOUR_MQTT_PW"
#define mqtt_client "ESP8266Client." sensor_id
#define OPERATION_BLINK_EN true // blink continuously if in correct operation
#define OPERATION_PERIOD 5000 // sensor reading period in milliseconds
#define FORCE_PERIOD 12 // sensor reading publication force period in number of readings without publication
#define SERIAL_BAUDRATE 115200

View File

@ -0,0 +1,181 @@
/* Macrocell environmental sensor project EnviSens
*
* This firmware provides features to use the NodeMCU ESP12 unit as an environmental sensor broker.
* It currently collects all the sensor information via I2C from a connected ATMEGA.
*
* (C) 2019 Macrocell - Environmental sensing solutions
* proudly presented by Macrocell - FPGA Innovators
*/
#include <ESP8266WiFi.h>
#include <Wire.h>
#include <PubSubClient.h>
#include "DHT.h"
#include "mqtt_credentials.h"
#define TOPIC_BASE "sensor/" sensor_id "/"
#define TOPIC_TEMP TOPIC_BASE "temperature"
#define TOPIC_HMID TOPIC_BASE "humidity"
#define TOPIC_HEAT TOPIC_BASE "heat_index"
#define TOPIC_AIRQ TOPIC_BASE "air_gas"
#define DIFF_TEMP 0.3 // sensor has only 0.5°C accuracy, triggering on less is ludicrous
#define DIFF_HMID 2.5 // humidity doesn't change that much anyways
#define DIFF_HEAT 0.2 // this one's actually quite active
#define DIFF_AIRQ 5
float hmid = 0; // humidity
float hmid_r = 0; // humidity
float temp = 0; // temperature
float temp_r = 0; // temperature
float heat = 0; // heat index
float heat_r = 0; // heat index
float airq = 0; // air quality / gas
float airq_r = 0; // air quality / gas
char data[8];
char sensor_name[5];
float sensor_value;
WiFiClient espClient;
PubSubClient client(espClient);
void setup() {
Serial.begin(SERIAL_BAUDRATE);
pinMode(LED_BUILTIN, OUTPUT);
digitalWrite(LED_BUILTIN, LOW);
setup_wifi();
client.setServer(mqtt_server, mqtt_port);
Wire.begin(); // join i2c bus as master
}
void setup_wifi() {
delay(10);
// Connect to a WiFi network
Serial.println();
Serial.print("Connecting to ");
Serial.println(wifi_ssid);
WiFi.begin(wifi_ssid, wifi_password);
WiFi.mode(WIFI_STA);
// blink LED fast until WiFi is connected
while (WiFi.status() != WL_CONNECTED) {
delay(200);
digitalWrite(LED_BUILTIN, HIGH);
Serial.print(".");
delay(200);
digitalWrite(LED_BUILTIN, LOW);
}
// WiFi connected
Serial.println("");
Serial.println("WiFi connected");
Serial.println("IP address: ");
Serial.println(WiFi.localIP());
}
void reconnect() {
// Loop until reconnected
while (!client.connected()) {
Serial.print("Attempting MQTT connection...");
// Attempt to connect
if (client.connect(mqtt_client, mqtt_user, mqtt_password)) {
Serial.println("connected");
} else {
Serial.print("failed, rc=");
Serial.print(client.state());
Serial.println(" try again in 5 seconds");
digitalWrite(LED_BUILTIN, HIGH);
// Wait 5 seconds before retrying
delay(4000);
digitalWrite(LED_BUILTIN, LOW);
delay(1000);
}
}
}
bool checkBound(float newValue, float prevValue, float maxDiff) {
return !isnan(newValue) &&
(newValue < prevValue - maxDiff || newValue > prevValue + maxDiff);
}
long lastMsg = 0;
long lastSent = 0;
bool published = false;
bool forcePublish = false;
bool publish (String desc, char *topic, float val, float &val_r, int diff, bool force){
if (checkBound(val, val_r, 0.3) or force) {
val_r = val;
Serial.print("New " + desc + ": ");
Serial.println(String(val).c_str());
client.publish(topic, String(val).c_str(), true);
return true;
} else {
return false;
}
}
void loop() {
if (!client.connected()) {
reconnect();
}
client.loop();
digitalWrite(LED_BUILTIN, HIGH);
long now = millis();
if (now - lastMsg > OPERATION_PERIOD / 2) {
if (OPERATION_BLINK_EN) {digitalWrite(LED_BUILTIN, LOW);}
}
if (now - lastMsg > OPERATION_PERIOD) {
lastMsg = now;
if (OPERATION_BLINK_EN) {digitalWrite(LED_BUILTIN, HIGH);}
Wire.requestFrom(8, 8); // request 6 bytes from slave device #8
int i = 0;
while(Wire.available()) { // slave may send less than requested
char c = Wire.read(); // receive a byte as character
data[i] = byte(c);
i = i + 1;
}
union sensor_tag {byte sensor_b[4]; float sensor_float;} sensor_union; //DRPS = Drum Revs per Second
sensor_name[0] = char(data[0]);
sensor_name[1] = char(data[1]);
sensor_name[2] = char(data[2]);
sensor_name[3] = char(data[3]);
sensor_name[4] = 0;
sensor_union.sensor_b[0] = data[4];
sensor_union.sensor_b[1] = data[5];
sensor_union.sensor_b[2] = data[6];
sensor_union.sensor_b[3] = data[7];
sensor_value = sensor_union.sensor_float;
Serial.print("Received: ");
Serial.print(sensor_name);
Serial.print(" - ");
Serial.println(sensor_value);
published = false;
if (lastSent > FORCE_PERIOD) {
Serial.println(F("Forcing a publish of all values"));
forcePublish = true;
lastSent = 0;
}
published += publish("temperature", TOPIC_TEMP, temp, temp_r, DIFF_TEMP, forcePublish);
published += publish("humidity", TOPIC_HMID, hmid, hmid_r, DIFF_HMID, forcePublish);
published += publish("heat index", TOPIC_HEAT, heat, heat_r, DIFF_HEAT, forcePublish);
published += publish("air quality", TOPIC_AIRQ, airq, airq_r, DIFF_AIRQ, forcePublish);
if (published == false) {
lastSent = lastSent + 1;
} else {
lastSent = 0;
}
forcePublish = false;
}
}