sabik-cpu/firmware/adc.c

#include "adc.h"
#include <stm32f4xx_adc.h>
#include <stm32f4xx_rcc.h>
#include <stm32f4xx_dma.h>
#include <stdio.h>
#include "systems.h"
#include <stm32f4xx.h>

volatile uint16_t adc_buffer[2] = {0,};

void adc_init()
{
	ADC_CommonInitTypeDef ADC_CommonInitStruct;
	ADC_InitTypeDef ADC_InitStructure;
	GPIO_InitTypeDef GPIO_InitStruct;
	
	printf("ADC init\r\n");

	// Enable Clocks
	RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);
	RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM5, ENABLE);
	RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_DMA1, ENABLE);
	
	// Set up GPIO
	GPIO_InitStruct.GPIO_Pin = GPIO_Pin_4 | GPIO_Pin_5;
	GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AN;
	GPIO_Init(GPIOA, &GPIO_InitStruct);

	// Set up timer
	TIM_TimeBaseInitTypeDef Timer_InitStruct;
	TIM_TimeBaseStructInit(&Timer_InitStruct);
	Timer_InitStruct.TIM_Prescaler = 0x0;
	Timer_InitStruct.TIM_CounterMode = TIM_CounterMode_Up;
	Timer_InitStruct.TIM_Period = (ADC_F_TIM / ADC_SAMPLE_RATE);
	Timer_InitStruct.TIM_ClockDivision = TIM_CKD_DIV1;
	Timer_InitStruct.TIM_RepetitionCounter = 0;
	TIM_TimeBaseInit(TIM5, &Timer_InitStruct);
	TIM_Cmd(TIM5, ENABLE);
	
	TIM_OCInitTypeDef TIM_OCInitStructure;
	TIM_OCStructInit (&TIM_OCInitStructure);
	TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
	TIM_OCInitStructure.TIM_OCIdleState = TIM_OCNIdleState_Reset;
	TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_Active;
	TIM_OC1Init (TIM5, &TIM_OCInitStructure);
	
	TIM_SetCompare1(TIM5, 0xFFFF);
	TIM_ITConfig(TIM5, TIM_IT_CC1, ENABLE);
	
	TIM_CCxCmd(TIM5, TIM_Channel_1, TIM_CCx_Enable);
	TIM_CCxNCmd(TIM5, TIM_Channel_1, TIM_CCx_Enable);
	
	NVIC_InitTypeDef NVIC_InitStruct;
	NVIC_InitStruct.NVIC_IRQChannel = TIM5_IRQn;
	NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 0x00;
	NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0x00;
	NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
	NVIC_Init(&NVIC_InitStruct);

	// Set up DMA
	DMA_InitTypeDef DMA_InitStruct;
	
	DMA_StructInit(&DMA_InitStruct);
	DMA_DeInit(ADC_RX_DMA_STREAM);
	
	DMA_InitStruct.DMA_Channel = ADC_RX_DMA_CHANNEL;
	DMA_InitStruct.DMA_PeripheralBaseAddr = (uint32_t) & (ADC1->DR);
	DMA_InitStruct.DMA_Memory0BaseAddr = (uint32_t)adc_buffer;
	DMA_InitStruct.DMA_DIR = DMA_DIR_PeripheralToMemory;
	DMA_InitStruct.DMA_BufferSize = 2;
	DMA_InitStruct.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
	DMA_InitStruct.DMA_MemoryInc = DMA_MemoryInc_Enable;
	DMA_InitStruct.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
	DMA_InitStruct.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
	DMA_InitStruct.DMA_Mode = DMA_Mode_Circular;
	DMA_InitStruct.DMA_Priority = DMA_Priority_High;
	DMA_InitStruct.DMA_FIFOMode = DMA_FIFOMode_Disable;
	DMA_InitStruct.DMA_FIFOThreshold = DMA_FIFOThreshold_HalfFull;
	DMA_InitStruct.DMA_MemoryBurst = DMA_MemoryBurst_Single;
	DMA_InitStruct.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
	DMA_Init(ADC_RX_DMA_STREAM, &DMA_InitStruct);
	
	DMA_ITConfig(ADC_RX_DMA_STREAM, DMA_IT_TC, ENABLE);
	
	NVIC_InitStruct.NVIC_IRQChannel = ADC_RX_DMA_IRQn;
	NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 0x00;
	NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0x00;
	NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
	NVIC_Init(&NVIC_InitStruct);
	
	DMA_Cmd(ADC_RX_DMA_STREAM, ENABLE);
	
	// Set up ADC
	ADC_DeInit();

	ADC_CommonStructInit(&ADC_CommonInitStruct);
	ADC_CommonInitStruct.ADC_Mode = ADC_Mode_Independent;
	ADC_CommonInitStruct.ADC_Prescaler = ADC_Prescaler_Div8;
	ADC_CommonInitStruct.ADC_DMAAccessMode = ADC_DMAAccessMode_Disabled;
	ADC_CommonInitStruct.ADC_TwoSamplingDelay = ADC_TwoSamplingDelay_20Cycles;
	ADC_CommonInit(&ADC_CommonInitStruct);

	ADC_StructInit(&ADC_InitStructure);
	ADC_InitStructure.ADC_Resolution = ADC_Resolution_12b;
	ADC_InitStructure.ADC_ScanConvMode = ENABLE;
	ADC_InitStructure.ADC_ContinuousConvMode = DISABLE;
	ADC_InitStructure.ADC_ExternalTrigConvEdge = ADC_ExternalTrigConvEdge_None; // TODO: trig via event
	ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_T5_CC1;
	ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
	ADC_InitStructure.ADC_NbrOfConversion = 2;
	ADC_Init(ADC1, &ADC_InitStructure);
	ADC_ITConfig(ADC1, ADC_IT_EOC, ENABLE);
	
	NVIC_InitStruct.NVIC_IRQChannel = ADC_IRQn;
	NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 0x00;
	NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0x00;
	NVIC_InitStruct.NVIC_IRQChannelCmd = DISABLE; // !
	NVIC_Init(&NVIC_InitStruct);
	
	ADC_DMARequestAfterLastTransferCmd(ADC1, ENABLE);

	ADC_EOCOnEachRegularChannelCmd(ADC1, DISABLE);
	ADC_RegularChannelConfig(ADC1, ADC_Channel_5, 1, ADC_SampleTime_28Cycles);
	ADC_RegularChannelConfig(ADC1, ADC_Channel_4, 2, ADC_SampleTime_28Cycles);

	// Turn it all on
	ADC_Cmd(ADC1, ENABLE);
	ADC_DMACmd(ADC1, ENABLE);
	
	printf("adc init done.\r\n");
	printf("ADC  CR1: %08x,  CR2: %08x\r\n", ADC1->CR1, ADC1->CR2);
	printf("ADC SQR1: %08x, SQR3: %08x\r\n", ADC1->SQR1, ADC1->SQR3);
	printf("DMA2 S0CR: %08x\r\n", ADC_RX_DMA_STREAM->CR);
	printf("ADC init complete.\r\n");
}

void DMA2_Stream0_IRQHandler()
{	
	int sample;
	DMA_ClearFlag(ADC_RX_DMA_STREAM, DMA_FLAG_TCIF0);
	//printf("[DMA-IRQ] %d, %d\r\n", adc_buffer[0], adc_buffer[1]);
	//sample = 2048 - ((adc_buffer[0] + adc_buffer[1]) / 2);
	sample = 2048 - adc_buffer[0];
	//printf("ADC0: %4d, ADC1: %4d, SMP: %4d\r\n",
	//	adc_buffer[0], adc_buffer[1], sample);
	
	GotSample(sample);
}

// Not used:
void ADC_IRQHandler()
{
	ADC_ClearFlag(ADC1, ADC_FLAG_EOC);
	//printf("[ADC-IRQ] %d, %d\r\n", adc_buffer[0], adc_buffer[1]);
}

void TIM5_IRQHandler()
{
	TIM_ClearFlag(TIM5, TIM_FLAG_CC1);
	// I would really like to this in HW via events, but somehow it's broken...
		/*static int s=0;
	s=!s;
	if (s) {
		LED_ON2;
	} else {
		LED_OFF2;
	}*/
	ADC_SoftwareStartConv(ADC1);
}