trashernet-soc/fpga/hdl/bench/bench_top_manual.vhd

-- -------------------------------------------------------------------------- --
--              TRASHERNET SoC - A Trashy Ethernet SoC for FPGAs              --
-- -------------------------------------------------------------------------- --
-- TODO
-- -------------------------------------------------------------------------- --
-- Author       : Markus Koch <markus@notsyncing.net>
-- Contributors : None
-- License      : Mozilla Public License (MPL) Version 2
-- -------------------------------------------------------------------------- --

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;

library design;
use design.all;
use std.textio.all;

library device_models;

entity bench_top_manual is
end entity bench_top_manual;

architecture bench of bench_top_manual is
	constant UART_BAUD : real := 38400.0;

	signal clk     : std_logic;
	signal rst_n_a : std_logic;

	signal uart_txd : std_logic;
	signal uart_rxd : std_logic;

	signal psram_ce_n : std_logic;
	signal psram_sclk : std_logic;
	signal psram_sio  : std_logic_vector(3 downto 0);

	signal rx_p : std_logic := '0';
	signal rx_n : std_logic := '1';
	signal tx_p : std_logic_vector(3 downto 0);
	signal tx_n : std_logic_vector(3 downto 0);

	procedure print(text : string) is
		variable lb : line;
	begin
		write(lb, text);
		writeline(output, lb);
	end procedure print;

	procedure print(text : character) is
		variable lb : line;
	begin
		write(lb, text);
		write(output, lb.all);
		flush(output);
	end procedure print;
begin
	clock_driver : process
		constant period : time := 1 sec / 48000000;
	begin
		clk <= '0';
		wait for period / 2;
		clk <= '1';
		wait for period / 2;
	end process clock_driver;

	reset_gen : process is
	begin
		rst_n_a <= '0';
		wait for 40 ns;
		rst_n_a <= '1';
		wait;
	end process reset_gen;

	top_inst : entity design.top
		port map(
			clk_50m    => clk,
			uart_tx    => uart_txd,
			uart_rx    => uart_rxd,
			eth_rx_p   => rx_p,
			--eth_rx_n   => rx_n,
			eth_tx_p   => tx_p,
			eth_tx_n   => tx_n,
			psram_ce_n => psram_ce_n,
			psram_sclk => psram_sclk,
			psram_sio  => psram_sio
		);

	aps6404l_inst : entity device_models.aps6404l
		port map(
			ce_n => psram_ce_n,
			sclk => psram_sclk,
			sio  => psram_sio
		);

	uart_decoder : process is
		constant DELAY : time := (1 sec / UART_BAUD);
		variable d     : std_logic_vector(7 downto 0);
	begin
		wait until falling_edge(uart_txd);
		wait for 0.5 * DELAY;
		for i in 0 to 7 loop
			wait for DELAY;
			d(i) := uart_txd;
		end loop;
		wait for 1.0 * DELAY;
		print(character'val(to_integer(unsigned(d))));
	end process uart_decoder;

	loader : process is
		procedure uart_tx(d : std_logic_vector(7 downto 0)) is
			constant DELAY : time := (1 sec / UART_BAUD);
		begin
			uart_rxd <= '0';
			wait for DELAY;
			for i in d'low to d'high loop
				uart_rxd <= d(i);
				wait for DELAY;
			end loop;
			uart_rxd <= '1';
			wait for DELAY;
		end procedure uart_tx;

	begin
		uart_rxd <= '1';
		wait for (1 sec / UART_BAUD) * 10;

		report ("Writing ABCD+jalr0 to RAM...");
		-- WRITE
		uart_tx(x"01");

		-- to RAM
		uart_tx(x"40");
		uart_tx(x"00");
		uart_tx(x"00");
		uart_tx(x"00");

		-- 8 bytes
		uart_tx(x"00");
		uart_tx(x"00");
		uart_tx(x"00");
		uart_tx(x"08");

		-- with this data ("ABCD", jalr zero)
		uart_tx(x"41");
		uart_tx(x"42");
		uart_tx(x"43");
		uart_tx(x"44");
		uart_tx(x"e7");
		uart_tx(x"00");
		uart_tx(x"00");
		uart_tx(x"00");

		report ("Reading back from RAM...");
		-- READ
		uart_tx(x"02");

		-- from RAM
		uart_tx(x"40");
		uart_tx(x"00");
		uart_tx(x"00");
		uart_tx(x"00");

		-- 4 bytes ("ABCD")
		uart_tx(x"00");
		uart_tx(x"00");
		uart_tx(x"00");
		uart_tx(x"04");

		print("RX Data: ");
		wait for (1 sec / UART_BAUD) * 10 * 5;
		print("");

		report ("Jumping to RAM+4...");
		-- JUMP
		uart_tx(x"03");

		-- to RAM (+4, jalr zero)
		uart_tx(x"40");
		uart_tx(x"00");
		uart_tx(x"00");
		uart_tx(x"04");

		-- The program will jump back to the loader, so we should be able to read again
		wait for 100 us;

		report ("Reading from RAM again...");
		-- READ
		uart_tx(x"02");

		-- from RAM
		uart_tx(x"40");
		uart_tx(x"00");
		uart_tx(x"00");
		uart_tx(x"00");

		-- 4 bytes
		uart_tx(x"00");
		uart_tx(x"00");
		uart_tx(x"00");
		uart_tx(x"04");

		print("RX Data: ");
		wait for (1 sec / UART_BAUD) * 10 * 5;
		print("");

		wait for 400 us;

		report "Done.";

		std.env.stop;
		wait;

	end process loader;

end architecture bench;

-- Commands to test on real HW
-- ---------------------------
-- Dump boot ROM		   : 02 00 00 00 00 00 00 00 FF
-- Write four bytes to RAM : 01 40 00 00 00 00 00 00 04 01 02 03 04
-- Dump these four bytes   : 02 40 00 00 00 00 00 00 04