fpga/mor1kx-bemicrocv
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
master
mor1kx-bemicrocv/ip/altera/ddr3/ddr3_p0_acv_hard_memphy.v

884 lines
30 KiB
Coq
Raw Permalink Normal View History

Initial commit
2016-08-04 19:22:38 +02:00
// (C) 2001-2015 Altera Corporation. All rights reserved.
// Your use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any output
// files any of the foregoing (including device programming or simulation
// files), and any associated documentation or information are expressly subject
// to the terms and conditions of the Altera Program License Subscription
// Agreement, Altera MegaCore Function License Agreement, or other applicable
// license agreement, including, without limitation, that your use is for the
// sole purpose of programming logic devices manufactured by Altera and sold by
// Altera or its authorized distributors. Please refer to the applicable
// agreement for further details.
// ********************************************************************************************************************************
// File name: acv_hard_memphy.v
// This file instantiates all the main components of the PHY.
// ********************************************************************************************************************************
`timescale 1 ps / 1 ps
module ddr3_p0_acv_hard_memphy (
global_reset_n,
soft_reset_n,
ctl_reset_n,
ctl_reset_export_n,
afi_reset_n,
pll_locked,
oct_ctl_rs_value,
oct_ctl_rt_value,
afi_addr,
afi_ba,
afi_cke,
afi_cs_n,
afi_ras_n,
afi_we_n,
afi_cas_n,
afi_rst_n,
afi_odt,
afi_mem_clk_disable,
afi_dqs_burst,
afi_wdata_valid,
afi_wdata,
afi_dm,
afi_rdata,
afi_rdata_en,
afi_rdata_en_full,
afi_rdata_valid,
afi_wlat,
afi_rlat,
afi_cal_success,
afi_cal_fail,
csr_clk,
csr_reset_n,
csr_addr,
csr_be,
csr_rdata,
csr_read_req,
csr_wdata,
csr_write_req,
csr_rdata_valid,
csr_waitrequest,
avl_read,
avl_write,
avl_address,
avl_writedata,
avl_waitrequest,
avl_readdata,
cfg_addlat,
cfg_bankaddrwidth,
cfg_caswrlat,
cfg_coladdrwidth,
cfg_csaddrwidth,
cfg_devicewidth,
cfg_dramconfig,
cfg_interfacewidth,
cfg_rowaddrwidth,
cfg_tcl,
cfg_tmrd,
cfg_trefi,
cfg_trfc,
cfg_twr,
io_intaddrdout,
io_intbadout,
io_intcasndout,
io_intckdout,
io_intckedout,
io_intckndout,
io_intcsndout,
io_intdmdout,
io_intdqdin,
io_intdqdout,
io_intdqoe,
io_intdqsbdout,
io_intdqsboe,
io_intdqsdout,
io_intdqslogicdqsena,
io_intdqslogicfiforeset,
io_intdqslogicincrdataen,
io_intdqslogicincwrptr,
io_intdqslogicoct,
io_intdqslogicrdatavalid,
io_intdqslogicreadlatency,
io_intdqsoe,
io_intodtdout,
io_intrasndout,
io_intresetndout,
io_intwendout,
io_intafirlat,
io_intafiwlat,
io_intaficalfail,
io_intaficalsuccess,
mem_a,
mem_ba,
mem_cs_n,
mem_cke,
mem_odt,
mem_we_n,
mem_ras_n,
mem_cas_n,
mem_reset_n,
mem_dq,
mem_dm,
mem_ck,
mem_ck_n,
mem_dqs,
mem_dqs_n,
reset_n_scc_clk,
reset_n_avl_clk,
scc_data,
scc_dqs_ena,
scc_dqs_io_ena,
scc_dq_ena,
scc_dm_ena,
scc_upd,
capture_strobe_tracking,
phy_clk,
ctl_clk,
phy_reset_n,
pll_afi_clk,
pll_afi_half_clk,
pll_addr_cmd_clk,
pll_mem_clk,
pll_mem_phy_clk,
pll_afi_phy_clk,
pll_avl_phy_clk,
pll_write_clk,
pll_write_clk_pre_phy_clk,
pll_dqs_ena_clk,
seq_clk,
pll_avl_clk,
pll_config_clk,
dll_clk,
dll_pll_locked,
dll_phy_delayctrl
);
// ********************************************************************************************************************************
// BEGIN PARAMETER SECTION
// All parameters default to "" will have their values passed in from higher level wrapper with the controller and driver
parameter DEVICE_FAMILY = "";
parameter IS_HHP_HPS = "false";
// On-chip termination
parameter OCT_SERIES_TERM_CONTROL_WIDTH = "";
parameter OCT_PARALLEL_TERM_CONTROL_WIDTH = "";
// PHY-Memory Interface
// Memory device specific parameters, they are set according to the memory spec
parameter MEM_ADDRESS_WIDTH = "";
parameter MEM_BANK_WIDTH = "";
parameter MEM_IF_CS_WIDTH = "";
parameter MEM_CLK_EN_WIDTH = "";
parameter MEM_CK_WIDTH = "";
parameter MEM_ODT_WIDTH = "";
parameter MEM_DQS_WIDTH = "";
parameter MEM_DM_WIDTH = "";
parameter MEM_CONTROL_WIDTH = "";
parameter MEM_DQ_WIDTH = "";
parameter MEM_READ_DQS_WIDTH = "";
parameter MEM_WRITE_DQS_WIDTH = "";
// PHY-Controller (AFI) Interface
// The AFI interface widths are derived from the memory interface widths based on full/half rate operations
// The calculations are done on higher level wrapper
// DLL Interface
// The DLL delay output control is always 6 bits for current existing devices
parameter DLL_DELAY_CTRL_WIDTH = "";
parameter MR1_ODS = "";
parameter MR1_RTT = "";
parameter MR2_RTT_WR = "";
// CSR Port parameters
parameter CSR_ADDR_WIDTH = "";
parameter CSR_DATA_WIDTH = "";
parameter CSR_BE_WIDTH = "";
parameter TB_PROTOCOL = "";
parameter TB_MEM_CLK_FREQ = "";
parameter TB_RATE = "";
parameter TB_MEM_DQ_WIDTH = "";
parameter TB_MEM_DQS_WIDTH = "";
parameter TB_PLL_DLL_MASTER = "";
parameter FAST_SIM_MODEL = "";
parameter FAST_SIM_CALIBRATION = "";
// Width of the calibration status register used to control calibration skipping.
parameter CALIB_REG_WIDTH = "";
parameter AC_ROM_INIT_FILE_NAME = "";
parameter INST_ROM_INIT_FILE_NAME = "";
// The number of AFI Resets to generate
localparam NUM_AFI_RESET = 4;
// Addr/cmd clock phase
localparam ADC_PHASE_SETTING = 0;
localparam ADC_INVERT_PHASE = "true";
// END PARAMETER SECTION
// ********************************************************************************************************************************
// ********************************************************************************************************************************
// BEGIN PORT SECTION
// Reset Interface
input global_reset_n; // Resets (active-low) the whole system (all PHY logic + PLL)
input soft_reset_n; // Resets (active-low) PHY logic only, PLL is NOT reset
input pll_locked; // Indicates that PLL is locked
output ctl_reset_n; // Asynchronously asserted and synchronously de-asserted on ctl_clk domain
output ctl_reset_export_n; // Asynchronously asserted and synchronously de-asserted on ctl_clk domain
output afi_reset_n; // Asynchronously asserted and synchronously de-asserted on afi_clk domain
input [OCT_SERIES_TERM_CONTROL_WIDTH-1:0] oct_ctl_rs_value;
input [OCT_PARALLEL_TERM_CONTROL_WIDTH-1:0] oct_ctl_rt_value;
// PHY-Controller Interface, AFI 2.0
// Control Interface
input [19:0] afi_addr;
input [2:0] afi_ba;
input [1:0] afi_cke;
input [1:0] afi_cs_n;
input [0:0] afi_cas_n;
input [1:0] afi_odt;
input [0:0] afi_ras_n;
input [0:0] afi_we_n;
input [0:0] afi_rst_n;
input [0:0] afi_mem_clk_disable;
input [4:0] afi_dqs_burst;
output [3:0] afi_wlat;
output [4:0] afi_rlat;
// Write data interface
input [79:0] afi_wdata; // write data
input [4:0] afi_wdata_valid; // write data valid, used to maintain write latency required by protocol spec
input [9:0] afi_dm; // write data mask
// Read data interface
output [79:0] afi_rdata; // read data
input [4:0] afi_rdata_en; // read enable, used to maintain the read latency calibrated by PHY
input [4:0] afi_rdata_en_full; // read enable full burst, used to create DQS enable
output [0:0] afi_rdata_valid; // read data valid
// Status interface
output afi_cal_success; // calibration success
output afi_cal_fail; // calibration failure
// Avalon interface to the sequencer
input [15:0] avl_address; //MarkW TODO: the sequencer only uses 13 bits
input avl_read;
output [31:0] avl_readdata;
output avl_waitrequest;
input avl_write;
input [31:0] avl_writedata;
// Configuration interface to the memory controller
input [7:0] cfg_addlat;
input [7:0] cfg_bankaddrwidth;
input [7:0] cfg_caswrlat;
input [7:0] cfg_coladdrwidth;
input [7:0] cfg_csaddrwidth;
input [7:0] cfg_devicewidth;
input [23:0] cfg_dramconfig;
input [7:0] cfg_interfacewidth;
input [7:0] cfg_rowaddrwidth;
input [7:0] cfg_tcl;
input [7:0] cfg_tmrd;
input [15:0] cfg_trefi;
input [7:0] cfg_trfc;
input [7:0] cfg_twr;
// IO/bypass interface to the core (or soft controller)
input [63:0] io_intaddrdout;
input [11:0] io_intbadout;
input [3:0] io_intcasndout;
input [3:0] io_intckdout;
input [7:0] io_intckedout;
input [3:0] io_intckndout;
input [7:0] io_intcsndout;
input [19:0] io_intdmdout;
output [179:0] io_intdqdin;
input [179:0] io_intdqdout;
input [89:0] io_intdqoe;
input [19:0] io_intdqsbdout;
input [9:0] io_intdqsboe;
input [19:0] io_intdqsdout;
input [9:0] io_intdqslogicdqsena;
input [4:0] io_intdqslogicfiforeset;
input [9:0] io_intdqslogicincrdataen;
input [9:0] io_intdqslogicincwrptr;
input [9:0] io_intdqslogicoct;
output [4:0] io_intdqslogicrdatavalid;
input [24:0] io_intdqslogicreadlatency;
input [9:0] io_intdqsoe;
input [7:0] io_intodtdout;
input [3:0] io_intrasndout;
input [3:0] io_intresetndout;
input [3:0] io_intwendout;
output [4:0] io_intafirlat;
output [3:0] io_intafiwlat;
output io_intaficalfail;
output io_intaficalsuccess;
// PHY-Memory Interface
output [MEM_ADDRESS_WIDTH-1:0] mem_a;
output [MEM_BANK_WIDTH-1:0] mem_ba;
output [MEM_IF_CS_WIDTH-1:0] mem_cs_n;
output [MEM_CLK_EN_WIDTH-1:0] mem_cke;
output [MEM_ODT_WIDTH-1:0] mem_odt;
output [MEM_CONTROL_WIDTH-1:0] mem_we_n;
output [MEM_CONTROL_WIDTH-1:0] mem_ras_n;
output [MEM_CONTROL_WIDTH-1:0] mem_cas_n;
output mem_reset_n;
inout [MEM_DQ_WIDTH-1:0] mem_dq;
output [MEM_DM_WIDTH-1:0] mem_dm;
output [MEM_CK_WIDTH-1:0] mem_ck;
output [MEM_CK_WIDTH-1:0] mem_ck_n;
inout [MEM_DQS_WIDTH-1:0] mem_dqs;
inout [MEM_DQS_WIDTH-1:0] mem_dqs_n;
output reset_n_scc_clk;
output reset_n_avl_clk;
// Scan chain configuration manager interface
input scc_data;
input [MEM_READ_DQS_WIDTH-1:0] scc_dqs_ena;
input [MEM_READ_DQS_WIDTH-1:0] scc_dqs_io_ena;
input [MEM_DQ_WIDTH-1:0] scc_dq_ena;
input [MEM_DM_WIDTH-1:0] scc_dm_ena;
input [0:0] scc_upd;
output [MEM_READ_DQS_WIDTH-1:0] capture_strobe_tracking;
output phy_clk;
output ctl_clk;
output phy_reset_n;
// PLL Interface
input pll_afi_clk; // clocks AFI interface logic
input pll_afi_half_clk; //
input pll_addr_cmd_clk; // clocks address/command DDIO
input pll_mem_clk; // output clock to memory
input pll_write_clk; // clocks write data DDIO
input pll_write_clk_pre_phy_clk;
input pll_dqs_ena_clk;
input seq_clk;
input pll_avl_clk;
input pll_config_clk;
input pll_mem_phy_clk;
input pll_afi_phy_clk;
input pll_avl_phy_clk;
// DLL Interface
output dll_clk;
output dll_pll_locked;
input [DLL_DELAY_CTRL_WIDTH-1:0] dll_phy_delayctrl; // dll output used to control the input DQS phase shift
// CSR Port input/output
input csr_clk;
input csr_reset_n;
input [CSR_ADDR_WIDTH - 1: 0] csr_addr;
input [CSR_BE_WIDTH - 1: 0] csr_be;
input csr_read_req;
input [CSR_DATA_WIDTH - 1: 0] csr_wdata;
input csr_write_req;
output [CSR_DATA_WIDTH - 1: 0] csr_rdata;
output csr_rdata_valid;
output csr_waitrequest;
// END PARAMETER SECTION
// ********************************************************************************************************************************
wire [179:0] ddio_phy_dqdin;
wire [4:0] ddio_phy_dqslogic_rdatavalid;
wire [63:0] phy_ddio_address;
wire [11:0] phy_ddio_bank;
wire [3:0] phy_ddio_cas_n;
wire [3:0] phy_ddio_ck;
wire [7:0] phy_ddio_cke;
wire [3:0] phy_ddio_ck_n;
wire [7:0] phy_ddio_cs_n;
wire [19:0] phy_ddio_dmdout;
wire [179:0] phy_ddio_dqdout;
wire [89:0] phy_ddio_dqoe;
wire [9:0] phy_ddio_dqsb_oe;
wire [9:0] phy_ddio_dqslogic_dqsena;
wire [4:0] phy_ddio_dqslogic_fiforeset;
wire [4:0] phy_ddio_dqslogic_aclr_pstamble;
wire [4:0] phy_ddio_dqslogic_aclr_fifoctrl;
wire [9:0] phy_ddio_dqslogic_incrdataen;
wire [9:0] phy_ddio_dqslogic_incwrptr;
wire [9:0] phy_ddio_dqslogic_oct;
wire [24:0] phy_ddio_dqslogic_readlatency;
wire [9:0] phy_ddio_dqs_oe;
wire [19:0] phy_ddio_dqs_dout;
wire [7:0] phy_ddio_odt;
wire [3:0] phy_ddio_ras_n;
wire [3:0] phy_ddio_reset_n;
wire [3:0] phy_ddio_we_n;
wire read_capture_clk;
wire [NUM_AFI_RESET-1:0] reset_n_afi_clk;
wire reset_n_addr_cmd_clk;
wire reset_n_seq_clk;
wire reset_n_scc_clk;
wire reset_n_avl_clk;
wire reset_n_resync_clk;
localparam SKIP_CALIBRATION_STEPS = 7'b1111111;
localparam CALIBRATION_STEPS = (FAST_SIM_MODEL && (FAST_SIM_CALIBRATION != "true") ? SKIP_CALIBRATION_STEPS : 7'b1100011);
localparam SKIP_MEM_INIT = 1'b1;
localparam SEQ_CALIB_INIT = {CALIBRATION_STEPS, SKIP_MEM_INIT};
generate
if (IS_HHP_HPS != "true") begin
reg [CALIB_REG_WIDTH-1:0] seq_calib_init_reg /* synthesis syn_noprune syn_preserve = 1 */;
// Initialization of the sequencer status register. This register
// is preserved in the netlist so that it can be forced during simulation
always @(posedge pll_afi_clk)
`ifdef SYNTH_FOR_SIM
`else
//synthesis translate_off
`endif
seq_calib_init_reg <= SEQ_CALIB_INIT;
`ifdef SYNTH_FOR_SIM
`else
//synthesis translate_on
//synthesis read_comments_as_HDL on
`endif
// seq_calib_init_reg <= {CALIB_REG_WIDTH{1'b0}};
`ifdef SYNTH_FOR_SIM
`else
// synthesis read_comments_as_HDL off
`endif
end
endgenerate
// ********************************************************************************************************************************
// The reset scheme used in the UNIPHY is asynchronous assert and synchronous de-assert
// The reset block has 2 main functionalities:
// 1. Keep all the PHY logic in reset state until after the PLL is locked
// 2. Synchronize the reset to each clock domain
// ********************************************************************************************************************************
generate
if (IS_HHP_HPS != "true") begin
ddr3_p0_reset ureset(
.pll_afi_clk (pll_afi_clk),
.pll_addr_cmd_clk (pll_addr_cmd_clk),
.pll_dqs_ena_clk (pll_dqs_ena_clk),
.seq_clk (seq_clk),
.pll_avl_clk (pll_avl_clk),
.scc_clk (pll_config_clk),
.reset_n_scc_clk (reset_n_scc_clk),
.reset_n_avl_clk (reset_n_avl_clk),
.read_capture_clk (read_capture_clk),
.pll_locked (pll_locked),
.global_reset_n (global_reset_n),
.soft_reset_n (soft_reset_n),
.ctl_reset_export_n (ctl_reset_export_n),
.reset_n_afi_clk (reset_n_afi_clk),
.reset_n_addr_cmd_clk (reset_n_addr_cmd_clk),
.reset_n_seq_clk (reset_n_seq_clk),
.reset_n_resync_clk (reset_n_resync_clk)
);
defparam ureset.MEM_READ_DQS_WIDTH = MEM_READ_DQS_WIDTH;
defparam ureset.NUM_AFI_RESET = NUM_AFI_RESET;
end else begin
// synthesis translate_off
ddr3_p0_reset ureset(
.pll_afi_clk (pll_afi_clk),
.pll_addr_cmd_clk (pll_addr_cmd_clk),
.pll_dqs_ena_clk (pll_dqs_ena_clk),
.seq_clk (seq_clk),
.pll_avl_clk (pll_avl_clk),
.scc_clk (pll_config_clk),
.reset_n_scc_clk (reset_n_scc_clk),
.reset_n_avl_clk (reset_n_avl_clk),
.read_capture_clk (read_capture_clk),
.pll_locked (pll_locked),
.global_reset_n (global_reset_n),
.soft_reset_n (soft_reset_n),
.ctl_reset_export_n (ctl_reset_export_n),
.reset_n_afi_clk (reset_n_afi_clk),
.reset_n_addr_cmd_clk (reset_n_addr_cmd_clk),
.reset_n_seq_clk (reset_n_seq_clk),
.reset_n_resync_clk (reset_n_resync_clk)
);
defparam ureset.MEM_READ_DQS_WIDTH = MEM_READ_DQS_WIDTH;
defparam ureset.NUM_AFI_RESET = NUM_AFI_RESET;
// synthesis translate_on
// synthesis read_comments_as_HDL on
// assign reset_n_afi_clk = {NUM_AFI_RESET{global_reset_n}};
// assign reset_n_addr_cmd_clk = global_reset_n;
// assign reset_n_avl_clk = global_reset_n;
// assign reset_n_scc_clk = global_reset_n;
// synthesis read_comments_as_HDL off
end
endgenerate
assign phy_clk = seq_clk;
assign phy_reset_n = reset_n_seq_clk;
assign dll_clk = pll_write_clk_pre_phy_clk;
assign dll_pll_locked = pll_locked;
// PHY clock and LDC
wire afi_clk;
wire avl_clk;
wire adc_clk;
wire adc_clk_cps;
ddr3_p0_acv_ldc # (
.DLL_DELAY_CTRL_WIDTH (DLL_DELAY_CTRL_WIDTH),
.ADC_PHASE_SETTING (ADC_PHASE_SETTING),
.ADC_INVERT_PHASE (ADC_INVERT_PHASE),
.IS_HHP_HPS (IS_HHP_HPS)
) memphy_ldc (
.pll_hr_clk (pll_avl_phy_clk),
.pll_dq_clk (pll_write_clk),
.pll_dqs_clk (pll_mem_phy_clk),
.dll_phy_delayctrl (dll_phy_delayctrl),
.afi_clk (afi_clk),
.avl_clk (avl_clk),
.adc_clk (adc_clk),
.adc_clk_cps (adc_clk_cps)
);
assign ctl_clk = afi_clk;
assign afi_reset_n = reset_n_afi_clk;
// ********************************************************************************************************************************
// This is the hard PHY instance
// ********************************************************************************************************************************
cyclonev_mem_phy hphy_inst (
.pllaficlk (afi_clk),
.pllavlclk (avl_clk),
.plllocked (pll_locked),
.plladdrcmdclk (adc_clk),
.globalresetn (global_reset_n),
.softresetn (soft_reset_n),
.phyresetn (phy_reset_n),
.ctlresetn (ctl_reset_n),
.iointaddrdout (io_intaddrdout),
.iointbadout (io_intbadout),
.iointcasndout (io_intcasndout),
.iointckdout (io_intckdout),
.iointckedout (io_intckedout),
.iointckndout (io_intckndout),
.iointcsndout (io_intcsndout),
.iointdmdout (io_intdmdout),
.iointdqdin (io_intdqdin),
.iointdqdout (io_intdqdout),
.iointdqoe (io_intdqoe),
.iointdqsbdout (io_intdqsbdout),
.iointdqsboe (io_intdqsboe),
.iointdqsdout (io_intdqsdout),
.iointdqslogicdqsena (io_intdqslogicdqsena),
.iointdqslogicfiforeset (io_intdqslogicfiforeset),
.iointdqslogicincrdataen (io_intdqslogicincrdataen),
.iointdqslogicincwrptr (io_intdqslogicincwrptr),
.iointdqslogicoct (io_intdqslogicoct),
.iointdqslogicrdatavalid (io_intdqslogicrdatavalid),
.iointdqslogicreadlatency (io_intdqslogicreadlatency),
.iointdqsoe (io_intdqsoe),
.iointodtdout (io_intodtdout),
.iointrasndout (io_intrasndout),
.iointresetndout (io_intresetndout),
.iointwendout (io_intwendout),
.iointafirlat (io_intafirlat),
.iointafiwlat (io_intafiwlat),
.iointaficalfail (io_intaficalfail),
.iointaficalsuccess (io_intaficalsuccess),
.ddiophydqdin (ddio_phy_dqdin),
.ddiophydqslogicrdatavalid (ddio_phy_dqslogic_rdatavalid),
.phyddioaddrdout (phy_ddio_address),
.phyddiobadout (phy_ddio_bank),
.phyddiocasndout (phy_ddio_cas_n),
.phyddiockdout (phy_ddio_ck),
.phyddiockedout (phy_ddio_cke),
.phyddiockndout (),
.phyddiocsndout (phy_ddio_cs_n),
.phyddiodmdout (phy_ddio_dmdout),
.phyddiodqdout (phy_ddio_dqdout),
.phyddiodqoe (phy_ddio_dqoe),
.phyddiodqsbdout (),
.phyddiodqsboe (phy_ddio_dqsb_oe),
.phyddiodqslogicdqsena (phy_ddio_dqslogic_dqsena),
.phyddiodqslogicfiforeset (phy_ddio_dqslogic_fiforeset),
.phyddiodqslogicaclrpstamble (phy_ddio_dqslogic_aclr_pstamble),
.phyddiodqslogicaclrfifoctrl (phy_ddio_dqslogic_aclr_fifoctrl),
.phyddiodqslogicincrdataen (phy_ddio_dqslogic_incrdataen),
.phyddiodqslogicincwrptr (phy_ddio_dqslogic_incwrptr),
.phyddiodqslogicoct (phy_ddio_dqslogic_oct),
.phyddiodqslogicreadlatency (phy_ddio_dqslogic_readlatency),
.phyddiodqsoe (phy_ddio_dqs_oe),
.phyddiodqsdout (phy_ddio_dqs_dout),
.phyddioodtdout (phy_ddio_odt),
.phyddiorasndout (phy_ddio_ras_n),
.phyddioresetndout (phy_ddio_reset_n),
.phyddiowendout (phy_ddio_we_n),
.afiaddr (afi_addr),
.afiba (afi_ba),
.aficalfail (afi_cal_fail),
.aficalsuccess (afi_cal_success),
.aficasn (afi_cas_n),
.aficke (afi_cke),
.aficsn (afi_cs_n),
.afidm (afi_dm),
.afidqsburst (afi_dqs_burst),
.afimemclkdisable (afi_mem_clk_disable),
.afiodt (afi_odt),
.afirasn (afi_ras_n),
.afirdata (afi_rdata),
.afirdataen (afi_rdata_en),
.afirdataenfull (afi_rdata_en_full),
.afirdatavalid (afi_rdata_valid),
.afirlat (afi_rlat),
.afirstn (afi_rst_n),
.afiwdata (afi_wdata),
.afiwdatavalid (afi_wdata_valid),
.afiwen (afi_we_n),
.afiwlat (afi_wlat),
.avladdress (avl_address),
.avlread (avl_read),
.avlreaddata (avl_readdata),
.avlresetn (reset_n_avl_clk),
.avlwaitrequest (avl_waitrequest),
.avlwrite (avl_write),
.avlwritedata (avl_writedata),
.cfgaddlat (cfg_addlat),
.cfgbankaddrwidth (cfg_bankaddrwidth),
.cfgcaswrlat (cfg_caswrlat),
.cfgcoladdrwidth (cfg_coladdrwidth),
.cfgcsaddrwidth (cfg_csaddrwidth),
.cfgdevicewidth (cfg_devicewidth),
.cfgdramconfig (cfg_dramconfig),
.cfginterfacewidth (cfg_interfacewidth),
.cfgrowaddrwidth (cfg_rowaddrwidth),
.cfgtcl (cfg_tcl),
.cfgtmrd (cfg_tmrd),
.cfgtrefi (cfg_trefi),
.cfgtrfc (cfg_trfc),
.cfgtwr (cfg_twr),
.scanen ()
);
defparam hphy_inst.hphy_ac_ddr_disable = "true";
defparam hphy_inst.hphy_datapath_delay = "one_cycle";
defparam hphy_inst.hphy_datapath_ac_delay = "one_and_half_cycles";
defparam hphy_inst.hphy_reset_delay_en = "false";
defparam hphy_inst.m_hphy_ac_rom_init_file = AC_ROM_INIT_FILE_NAME;
defparam hphy_inst.m_hphy_inst_rom_init_file = INST_ROM_INIT_FILE_NAME;
defparam hphy_inst.hphy_wrap_back_en = "false";
defparam hphy_inst.hphy_atpg_en = "false";
defparam hphy_inst.hphy_use_hphy = "true";
defparam hphy_inst.hphy_csr_pipelineglobalenable = "true";
defparam hphy_inst.hphy_hhp_hps = IS_HHP_HPS;
// ********************************************************************************************************************************
// The I/O block is responsible for instantiating all the built-in I/O logic in the FPGA
// ********************************************************************************************************************************
ddr3_p0_acv_hard_io_pads #(
.DEVICE_FAMILY(DEVICE_FAMILY),
.FAST_SIM_MODEL(FAST_SIM_MODEL),
.OCT_SERIES_TERM_CONTROL_WIDTH(OCT_SERIES_TERM_CONTROL_WIDTH),
.OCT_PARALLEL_TERM_CONTROL_WIDTH(OCT_PARALLEL_TERM_CONTROL_WIDTH),
.MEM_ADDRESS_WIDTH(MEM_ADDRESS_WIDTH),
.MEM_BANK_WIDTH(MEM_BANK_WIDTH),
.MEM_CHIP_SELECT_WIDTH(MEM_IF_CS_WIDTH),
.MEM_CLK_EN_WIDTH(MEM_CLK_EN_WIDTH),
.MEM_CK_WIDTH(MEM_CK_WIDTH),
.MEM_ODT_WIDTH(MEM_ODT_WIDTH),
.MEM_DQS_WIDTH(MEM_DQS_WIDTH),
.MEM_DM_WIDTH(MEM_DM_WIDTH),
.MEM_CONTROL_WIDTH(MEM_CONTROL_WIDTH),
.MEM_DQ_WIDTH(MEM_DQ_WIDTH),
.MEM_READ_DQS_WIDTH(MEM_READ_DQS_WIDTH),
.MEM_WRITE_DQS_WIDTH(MEM_WRITE_DQS_WIDTH),
.DLL_DELAY_CTRL_WIDTH(DLL_DELAY_CTRL_WIDTH),
.ADC_PHASE_SETTING(ADC_PHASE_SETTING),
.ADC_INVERT_PHASE(ADC_INVERT_PHASE),
.IS_HHP_HPS(IS_HHP_HPS)
) uio_pads (
.reset_n_addr_cmd_clk (reset_n_addr_cmd_clk),
.reset_n_afi_clk (reset_n_afi_clk[1]),
.oct_ctl_rs_value (oct_ctl_rs_value),
.oct_ctl_rt_value (oct_ctl_rt_value),
.phy_ddio_address (phy_ddio_address),
.phy_ddio_bank (phy_ddio_bank),
.phy_ddio_cs_n (phy_ddio_cs_n),
.phy_ddio_cke (phy_ddio_cke),
.phy_ddio_odt (phy_ddio_odt),
.phy_ddio_we_n (phy_ddio_we_n),
.phy_ddio_ras_n (phy_ddio_ras_n),
.phy_ddio_cas_n (phy_ddio_cas_n),
.phy_ddio_ck (phy_ddio_ck),
.phy_ddio_reset_n (phy_ddio_reset_n),
.phy_mem_address (mem_a),
.phy_mem_bank (mem_ba),
.phy_mem_cs_n (mem_cs_n),
.phy_mem_cke (mem_cke),
.phy_mem_odt (mem_odt),
.phy_mem_we_n (mem_we_n),
.phy_mem_ras_n (mem_ras_n),
.phy_mem_cas_n (mem_cas_n),
.phy_mem_reset_n (mem_reset_n),
.pll_afi_clk (pll_afi_clk),
.pll_mem_clk (pll_mem_clk),
.pll_afi_phy_clk (pll_afi_phy_clk),
.pll_avl_phy_clk (pll_avl_phy_clk),
.pll_avl_clk (pll_avl_clk),
.avl_clk (avl_clk),
.pll_mem_phy_clk (pll_mem_phy_clk),
.pll_write_clk (pll_write_clk),
.pll_dqs_ena_clk (pll_dqs_ena_clk),
.pll_addr_cmd_clk (adc_clk_cps),
.phy_mem_dq (mem_dq),
.phy_mem_dm (mem_dm),
.phy_mem_ck (mem_ck),
.phy_mem_ck_n (mem_ck_n),
.mem_dqs (mem_dqs),
.mem_dqs_n (mem_dqs_n),
.dll_phy_delayctrl (dll_phy_delayctrl),
.scc_clk (pll_config_clk),
.scc_data (scc_data),
.scc_dqs_ena (scc_dqs_ena),
.scc_dqs_io_ena (scc_dqs_io_ena),
.scc_dq_ena (scc_dq_ena),
.scc_dm_ena (scc_dm_ena),
.scc_upd (scc_upd[0]),
.phy_ddio_dmdout (phy_ddio_dmdout),
.phy_ddio_dqdout (phy_ddio_dqdout),
.phy_ddio_dqs_oe (phy_ddio_dqs_oe),
.phy_ddio_dqsdout (phy_ddio_dqs_dout),
.phy_ddio_dqsb_oe (phy_ddio_dqsb_oe),
.phy_ddio_dqslogic_oct (phy_ddio_dqslogic_oct),
.phy_ddio_dqslogic_fiforeset (phy_ddio_dqslogic_fiforeset),
.phy_ddio_dqslogic_aclr_pstamble (phy_ddio_dqslogic_aclr_pstamble),
.phy_ddio_dqslogic_aclr_fifoctrl (phy_ddio_dqslogic_aclr_fifoctrl),
.phy_ddio_dqslogic_incwrptr (phy_ddio_dqslogic_incwrptr),
.phy_ddio_dqslogic_readlatency (phy_ddio_dqslogic_readlatency),
.ddio_phy_dqslogic_rdatavalid (ddio_phy_dqslogic_rdatavalid),
.ddio_phy_dqdin (ddio_phy_dqdin),
.phy_ddio_dqslogic_incrdataen (phy_ddio_dqslogic_incrdataen),
.phy_ddio_dqslogic_dqsena (phy_ddio_dqslogic_dqsena),
.phy_ddio_dqoe (phy_ddio_dqoe),
.capture_strobe_tracking (capture_strobe_tracking)
);
// ********************************************************************************************************************************
// The CSR port of the PHY allow reading the status and configuration of the PHY
// ********************************************************************************************************************************
wire csr_pll_locked;
wire csr_afi_cal_success;
wire csr_afi_cal_fail;
assign csr_pll_locked = pll_locked;
assign csr_afi_cal_success = io_intaficalsuccess;
assign csr_afi_cal_fail = io_intaficalfail;
ddr3_p0_phy_csr #(
.CSR_ADDR_WIDTH(CSR_ADDR_WIDTH),
.CSR_DATA_WIDTH(CSR_DATA_WIDTH),
.CSR_BE_WIDTH(CSR_BE_WIDTH),
.MR1_RTT(MR1_RTT),
.MR1_ODS(MR1_ODS),
.MR2_RTT_WR(MR2_RTT_WR),
.MEM_READ_DQS_WIDTH(MEM_READ_DQS_WIDTH)
) phy_csr_inst (
.clk(csr_clk),
.reset_n(csr_reset_n),
.csr_addr(csr_addr),
.csr_be(csr_be),
.csr_write_req(csr_write_req),
.csr_wdata(csr_wdata),
.csr_read_req(csr_read_req),
.csr_rdata(csr_rdata),
.csr_rdata_valid(csr_rdata_valid),
.csr_waitrequest(csr_waitrequest),
.pll_locked(csr_pll_locked),
.afi_cal_success(csr_afi_cal_success),
.afi_cal_fail(csr_afi_cal_fail),
.seq_fom_in(8'b0),
.seq_fom_out(8'b0),
.cal_init_failing_stage(8'b0),
.cal_init_failing_group(8'b0)
);
generate
if (IS_HHP_HPS != "true") begin
reg afi_clk_reg /* synthesis dont_merge syn_noprune syn_preserve = 1 */;
always @(posedge pll_afi_clk)
afi_clk_reg <= ~afi_clk_reg;
reg afi_half_clk_reg /* synthesis dont_merge syn_noprune syn_preserve = 1 */;
always @(posedge pll_afi_half_clk)
afi_half_clk_reg <= ~afi_half_clk_reg;
reg avl_clk_reg /* synthesis dont_merge syn_noprune syn_preserve = 1 */;
always @(posedge pll_avl_clk)
avl_clk_reg <= ~avl_clk_reg;
reg config_clk_reg /* synthesis dont_merge syn_noprune syn_preserve = 1 */;
always @(posedge pll_config_clk)
config_clk_reg <= ~config_clk_reg;
end
endgenerate
// Calculate the ceiling of log_2 of the input value
function integer ceil_log2;
input integer value;
begin
value = value - 1;
for (ceil_log2 = 0; value > 0; ceil_log2 = ceil_log2 + 1)
value = value >> 1;
end
endfunction
endmodule
Reference in New Issue Copy Permalink