flashrom: Added write command, fixed read command
This commit is contained in:
parent
f55d735855
commit
265d1a80e1
@ -39,8 +39,8 @@ architecture rtl of bench_flashrom_controller is
|
||||
signal status_update_stb : std_logic;
|
||||
signal status : std_logic_vector(7 downto 0);
|
||||
signal info : std_logic_vector(31 downto 0);
|
||||
signal data_in : std_logic_vector(7 downto 0);
|
||||
signal data_in_valid : std_logic;
|
||||
signal data_in : std_logic_vector(7 downto 0) := x"00";
|
||||
signal data_in_next : std_logic;
|
||||
signal data_out : std_logic_vector(7 downto 0);
|
||||
signal data_out_valid : std_logic;
|
||||
signal spi_si : std_logic;
|
||||
@ -50,7 +50,7 @@ architecture rtl of bench_flashrom_controller is
|
||||
signal spi_cs_n : std_logic;
|
||||
signal spi_wp_n : std_logic;
|
||||
signal spi_busy : std_logic;
|
||||
signal spi_clk_cnt : integer := 0;
|
||||
signal spi_clk_cnt : integer := 0;
|
||||
|
||||
begin
|
||||
DataFlash_inst : entity work.DataFlash
|
||||
@ -83,7 +83,7 @@ begin
|
||||
status => status,
|
||||
info => info,
|
||||
data_in => data_in,
|
||||
data_in_valid => data_in_valid,
|
||||
data_in_next => data_in_next,
|
||||
data_out => data_out,
|
||||
data_out_valid => data_out_valid,
|
||||
spi_si => spi_si,
|
||||
@ -125,61 +125,35 @@ begin
|
||||
wait until ready = '1';
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
wait for 100 us;
|
||||
strobe(sync_stb); -- Make sure background_op_enable is '1' in device model (power up delay)
|
||||
|
||||
wait until ready = '1';
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
wait until spi_busy = '1';
|
||||
wait for 100 us;
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
strobe(load_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait until ready = '1';
|
||||
strobe(status_update_stb);
|
||||
|
||||
wait;
|
||||
end process bench;
|
||||
|
||||
spiclkcounter : process is
|
||||
begin
|
||||
wait until spi_sck = '1';
|
||||
wait until data_out_valid = '1';
|
||||
spi_clk_cnt <= spi_clk_cnt + 1;
|
||||
end process spiclkcounter;
|
||||
|
||||
data_provider : process is
|
||||
begin
|
||||
wait until data_in_next = '1';
|
||||
--wait until data_in_next = '1';
|
||||
data_in <= std_logic_vector(unsigned(data_in) + 1);
|
||||
end process data_provider;
|
||||
|
||||
end architecture rtl;
|
||||
|
||||
@ -21,7 +21,7 @@ entity flashrom_controller is
|
||||
|
||||
-- Data IF
|
||||
data_in : in std_logic_vector(7 downto 0);
|
||||
data_in_valid : in std_logic;
|
||||
data_in_next : out std_logic;
|
||||
data_out : out std_logic_vector(7 downto 0);
|
||||
data_out_valid : out std_logic;
|
||||
|
||||
@ -40,7 +40,7 @@ architecture RTL of flashrom_controller is
|
||||
constant max_dummy_bits : integer := 63;
|
||||
constant bootup_delay : integer := 4000;
|
||||
|
||||
type state_t is (INIT, GETINFO, GETSTATUS, LOADPAGE, IDLE);
|
||||
type state_t is (INIT, GETINFO, GETSTATUS, LOADPAGE, WRITEPAGE, IDLE);
|
||||
signal state : state_t;
|
||||
|
||||
signal spif_data_in_valid : std_logic;
|
||||
@ -54,6 +54,7 @@ architecture RTL of flashrom_controller is
|
||||
signal words_sent : integer range 0 to 511;
|
||||
signal spif_data_out_dummy_bits : integer range 0 to max_dummy_bits;
|
||||
signal spif_transmission_active : std_logic;
|
||||
signal command_is_latched : boolean;
|
||||
begin
|
||||
spi_wp_n <= '1';
|
||||
|
||||
@ -81,14 +82,15 @@ begin
|
||||
transmission_active => spif_transmission_active);
|
||||
|
||||
flashrom_controller_p : process(clk, rst) is
|
||||
variable temp_cnt : integer range 0 to bootup_delay;
|
||||
variable done : boolean;
|
||||
variable write_cnt : integer range 0 to bootup_delay;
|
||||
variable done : boolean;
|
||||
|
||||
procedure default_state is
|
||||
begin
|
||||
spi_reset_n <= '1';
|
||||
spif_data_in_valid <= '0';
|
||||
done := false;
|
||||
command_is_latched <= false;
|
||||
end procedure default_state;
|
||||
|
||||
procedure reset_state is
|
||||
@ -97,13 +99,14 @@ begin
|
||||
state <= INIT;
|
||||
spi_reset_n <= '0';
|
||||
words_sent <= 0;
|
||||
write_cnt := 0;
|
||||
|
||||
spif_data_in <= (others => '0');
|
||||
spif_data_in_length <= 0;
|
||||
spif_data_out_length <= 0;
|
||||
spif_data_out_dummy_bits <= 0;
|
||||
|
||||
temp_cnt := 0;
|
||||
write_cnt := 0;
|
||||
end procedure reset_state;
|
||||
|
||||
procedure run_command_single(constant data_in_length : integer; constant data_out_length : integer; constant data_out_dummy_bits : integer; constant nTxWords : integer; constant data_in : std_logic_vector) is
|
||||
@ -114,17 +117,17 @@ begin
|
||||
spif_data_in_valid <= '1';
|
||||
spif_data_in <= data_in & padBits(spif_data_in, data_in);
|
||||
|
||||
if temp_cnt = nTxWords then
|
||||
if write_cnt = nTxWords then
|
||||
spif_data_in_valid <= '0';
|
||||
elsif spif_data_next = '1' then
|
||||
temp_cnt := temp_cnt + 1;
|
||||
write_cnt := write_cnt + 1;
|
||||
end if;
|
||||
|
||||
if spif_data_out_valid = '1' and (temp_cnt = nTxWords) then
|
||||
if spif_data_out_valid = '1' and (write_cnt = nTxWords) then
|
||||
spif_data_in_valid <= '0';
|
||||
done := true;
|
||||
state <= IDLE;
|
||||
temp_cnt := 0;
|
||||
write_cnt := 0;
|
||||
end if;
|
||||
end procedure run_command_single;
|
||||
|
||||
@ -139,11 +142,11 @@ begin
|
||||
case state is
|
||||
when INIT =>
|
||||
words_sent <= 0;
|
||||
if temp_cnt = bootup_delay then
|
||||
temp_cnt := 0;
|
||||
state <= GETINFO;
|
||||
if write_cnt = bootup_delay then
|
||||
write_cnt := 0;
|
||||
state <= GETINFO;
|
||||
else
|
||||
temp_cnt := temp_cnt + 1;
|
||||
write_cnt := write_cnt + 1;
|
||||
end if;
|
||||
when GETINFO => -- TODO: In simulation I can only call this command once?!
|
||||
run_command_single(8, 32, 8, 5, FLASHROM_COMMAND_MANUFACTURER_ID);
|
||||
@ -151,23 +154,38 @@ begin
|
||||
info <= spif_data_out;
|
||||
end if;
|
||||
when IDLE =>
|
||||
temp_cnt := 0;
|
||||
write_cnt := 0;
|
||||
if status_update_stb = '1' then
|
||||
state <= GETSTATUS;
|
||||
end if;
|
||||
if load_stb = '1' then --debug only
|
||||
if load_stb = '1' then
|
||||
state <= LOADPAGE;
|
||||
end if;
|
||||
if sync_stb = '1' then
|
||||
state <= WRITEPAGE;
|
||||
end if;
|
||||
when GETSTATUS =>
|
||||
run_command_single(8, 8, 16, 3, FLASHROM_COMMAND_GET_STATUS);
|
||||
if done then
|
||||
status <= spif_data_out(7 downto 0);
|
||||
end if;
|
||||
when LOADPAGE =>
|
||||
run_command_single(24, 8, 34, 256/3+3, FLASHROM_COMMAND_CONT_ARRAY_READ & page); -- TODO: This will read one byte too far
|
||||
run_command_single(32, 8, 34, 258, FLASHROM_COMMAND_CONT_ARRAY_READ & page);
|
||||
if spif_data_next = '1' or command_is_latched then
|
||||
command_is_latched <= true;
|
||||
spif_data_in_length <= 8;
|
||||
spif_data_in <= (others => '0');
|
||||
end if;
|
||||
if done then
|
||||
report "Load page done." severity note;
|
||||
end if;
|
||||
when WRITEPAGE =>
|
||||
run_command_single(32, 8, 34, 257, FLASHROM_COMMAND_WRITE_THROUGH_1 & page);
|
||||
if spif_data_next = '1' or command_is_latched then
|
||||
command_is_latched <= true;
|
||||
spif_data_in_length <= 8;
|
||||
spif_data_in <= data_in & padBits(spif_data_in, data_in);
|
||||
end if;
|
||||
end case;
|
||||
end if;
|
||||
end if;
|
||||
@ -176,4 +194,5 @@ begin
|
||||
|
||||
data_out <= spif_data_out(7 downto 0);
|
||||
data_out_valid <= spif_data_out_valid when state = LOADPAGE else '0';
|
||||
data_in_next <= spif_data_next when (state = WRITEPAGE) and command_is_latched else '0';
|
||||
end architecture RTL;
|
||||
|
||||
@ -7,7 +7,8 @@ package flashrom_pkg is
|
||||
constant FLASHROM_COMMAND_MANUFACTURER_ID : std_logic_vector(7 downto 0) := x"9F";
|
||||
constant FLASHROM_COMMAND_GET_STATUS : std_logic_vector(7 downto 0) := x"D7";
|
||||
constant FLASHROM_COMMAND_CONT_ARRAY_READ : std_logic_vector(7 downto 0) := x"0B";
|
||||
|
||||
constant FLASHROM_COMMAND_WRITE_THROUGH_1 : std_logic_vector(7 downto 0) := x"82";
|
||||
|
||||
function padBits(target : std_logic_vector; other : std_logic_vector) return std_logic_vector;
|
||||
end package flashrom_pkg;
|
||||
|
||||
|
||||
85
wave/flashrom_controller.do
Normal file
85
wave/flashrom_controller.do
Normal file
@ -0,0 +1,85 @@
|
||||
onerror {resume}
|
||||
quietly WaveActivateNextPane {} 0
|
||||
add wave -noupdate /bench_flashrom_controller/DataFlash_inst/RDYBSY
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/clk
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/rst
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/clr
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/ready
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/page
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/sync_stb
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/load_stb
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/status_update_stb
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/status
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/info
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/data_in_next
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/data_in
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/data_out
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/data_out_valid
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/spi_si
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/spi_so
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/spi_sck
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/spi_reset_n
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/spi_cs_n
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/spi_wp_n
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/state
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/spif_data_in_valid
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/spif_data_in
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/spif_data_in_length
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/spif_data_next
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/spif_data_out
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/spif_data_out_valid
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/spif_data_out_length
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/words_sent
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/spif_data_out_dummy_bits
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/spif_transmission_active
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/spif_max_word_length
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/max_dummy_bits
|
||||
add wave -noupdate /bench_flashrom_controller/flashrom_controller_inst/bootup_delay
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/clk_divider
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/max_word_length
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/max_dummy_bits
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/clk
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/rst
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/clr
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/spi_si
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/spi_so
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/spi_sck
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/spi_cs_n
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/data_in_valid
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/data_in
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/data_in_length
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/data_next
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/data_out
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/data_out_valid
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/data_out_length
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/data_out_dummy_bits
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/transmission_active
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/state
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/ckDiv
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/shiftreg
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/bitCounter
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/bitCounterIn
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/data_in_length_i
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/data_out_length_i
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/delayCycle
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/oneBitRead
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/pseudoEdge
|
||||
add wave -noupdate -group spiphy /bench_flashrom_controller/flashrom_controller_inst/flashrom_spi_inst/dummy_passed
|
||||
TreeUpdate [SetDefaultTree]
|
||||
WaveRestoreCursors {{Cursor 1} {40873000 ps} 1} {{Cursor 2} {16507398 ps} 0} {{Cursor 3} {1785398 ps} 0}
|
||||
quietly wave cursor active 2
|
||||
configure wave -namecolwidth 150
|
||||
configure wave -valuecolwidth 100
|
||||
configure wave -justifyvalue left
|
||||
configure wave -signalnamewidth 1
|
||||
configure wave -snapdistance 10
|
||||
configure wave -datasetprefix 0
|
||||
configure wave -rowmargin 4
|
||||
configure wave -childrowmargin 2
|
||||
configure wave -gridoffset 0
|
||||
configure wave -gridperiod 1
|
||||
configure wave -griddelta 40
|
||||
configure wave -timeline 0
|
||||
configure wave -timelineunits ns
|
||||
update
|
||||
WaveRestoreZoom {0 ps} {105 us}
|
||||
Loading…
Reference in New Issue
Block a user