mor1kx-bemicrocv/bench/bench_flashrom_controller.vhd

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use std.textio.all;

library design;
use design.all;
use design.flashrom_pkg.all;

entity bench_flashrom_controller is
end entity bench_flashrom_controller;

architecture rtl of bench_flashrom_controller is
	signal clk : std_logic;
	signal rst : std_logic;

	procedure waitclk is
	begin
		wait until rising_edge(clk);
	end procedure waitclk;
	procedure waitnclk(n : integer) is
	begin
		for i in 1 to n loop
			wait until rising_edge(clk);
		end loop;
	end procedure waitnclk;
	procedure strobe(signal s : out std_logic) is
	begin
		s <= '1';
		waitclk;
		s <= '0';
		waitclk;
	end procedure strobe;
	signal clr               : std_logic;
	signal ready             : std_logic;
	signal page              : std_logic_vector(FLASHROM_PAGE_ADDR_WIDTH - 1 downto 0);
	signal sync_stb          : std_logic;
	signal load_stb          : std_logic;
	signal status_update_stb : std_logic;
	signal status            : std_logic_vector(7 downto 0);
	signal info              : std_logic_vector(31 downto 0);
	signal data_in           : std_logic_vector(7 downto 0) := x"00";
	signal data_in_next      : std_logic;
	signal data_out          : std_logic_vector(7 downto 0);
	signal data_out_valid    : std_logic;
	signal spi_si            : std_logic;
	signal spi_so            : std_logic;
	signal spi_sck           : std_logic;
	signal spi_reset_n       : std_logic;
	signal spi_cs_n          : std_logic;
	signal spi_wp_n          : std_logic;
	signal spi_busy          : std_logic;
	signal spi_clk_cnt       : integer                      := 0;

begin
	DataFlash_inst : entity work.DataFlash
		generic map(
			flashmemory     => "devicemodels/memory.txt",
			Rapid_interface => true,
			fsck            => 66,
			DEVICE          => "AT45DB011D", --AT45DB011D
			Tsck            => 13.6 ns)
		port map(
			SI     => spi_si,
			CSB    => spi_cs_n,
			SCK    => spi_sck,
			WPB    => spi_wp_n,
			RESETB => spi_reset_n,
			SO     => spi_so,
			RDYBSY => spi_busy
		);

	flashrom_controller_inst : entity design.flashrom_controller
		port map(
			clk               => clk,
			rst               => rst,
			clr               => clr,
			ready             => ready,
			page              => page,
			sync_stb          => sync_stb,
			load_stb          => load_stb,
			status_update_stb => status_update_stb,
			status            => status,
			info              => info,
			data_in           => data_in,
			data_in_next      => data_in_next,
			data_out          => data_out,
			data_out_valid    => data_out_valid,
			spi_si            => spi_si,
			spi_so            => spi_so,
			spi_sck           => spi_sck,
			spi_reset_n       => spi_reset_n,
			spi_cs_n          => spi_cs_n,
			spi_wp_n          => spi_wp_n
		);

	-- clock driver
	clock_driver : process
		constant PERIOD : time := 10 ns;
	begin
		clk <= '0';
		wait for PERIOD / 2;
		clk <= '1';
		wait for PERIOD / 2;
	end process clock_driver;

	--testbench
	bench : process is
	begin
		rst               <= '1';
		clr               <= '0';
		status_update_stb <= '0';
		load_stb          <= '0';
		page              <= (others => '0');
		wait for 10 ns * 2;
		wait until (rising_edge(clk));
		rst <= '0';
		wait for 10 ns * 2;
		wait until (rising_edge(clk));

		-- bench code here
		wait until ready = '1';
		strobe(status_update_stb);

		wait until ready = '1';
		strobe(status_update_stb);

		wait until ready = '1';
		wait for 100 us;
		strobe(sync_stb);               -- Make sure background_op_enable is '1' in device model (power up delay)

		wait until ready = '1';
		strobe(status_update_stb);

		wait until ready = '1';
		wait until spi_busy = '1';
		wait for 100 us;
		strobe(status_update_stb);

		wait until ready = '1';
		strobe(load_stb);

		wait;
	end process bench;

	spiclkcounter : process is
	begin
		wait until data_out_valid = '1';
		spi_clk_cnt <= spi_clk_cnt + 1;
	end process spiclkcounter;

	data_provider : process is
	begin
		wait until data_in_next = '1';
		--wait until data_in_next = '1';
		data_in <= std_logic_vector(unsigned(data_in) + 1);
	end process data_provider;

end architecture rtl;