flashrom: Added GETSTATUS command

bench/bench_flashrom_controller.vhd

@@ -37,7 +37,7 @@ architecture rtl of bench_flashrom_controller is
 	signal sync_stb          : std_logic;
 	signal load_stb          : std_logic;
 	signal status_update_stb : std_logic;
-	signal status            : std_logic_vector(31 downto 0);
+	signal status            : std_logic_vector(7 downto 0);
 	signal info              : std_logic_vector(31 downto 0);
 	signal data_in           : std_logic_vector(7 downto 0);
 	signal data_in_valid     : std_logic;
@@ -50,6 +50,7 @@ architecture rtl of bench_flashrom_controller is
 	signal spi_cs_n          : std_logic;
 	signal spi_wp_n          : std_logic;
 	signal spi_busy          : std_logic;
+	signal spi_clk_cnt       : integer := 0;
 
 begin
 	DataFlash_inst : entity work.DataFlash
@@ -57,7 +58,7 @@ begin
 			flashmemory     => "devicemodels/memory.txt",
 			Rapid_interface => true,
 			fsck            => 66,
-			DEVICE          => "AT45DB011D",
+			DEVICE          => "AT45DB011D", --AT45DB011D
 			Tsck            => 13.6 ns)
 		port map(
 			SI     => spi_si,
@@ -115,9 +116,24 @@ begin
 		wait until (rising_edge(clk));
 
 		-- bench code here
+		wait until ready = '1';
+		strobe(load_stb);
 		
+		wait until ready = '1';
+		strobe(load_stb);
 		
+		wait until ready = '1';
+		strobe(status_update_stb);
+		
+		wait until ready = '1';
+		strobe(status_update_stb);
 		wait;
 	end process bench;
 
+	spiclkcounter : process is
+	begin
+		wait until spi_sck = '1';
+		spi_clk_cnt <= spi_clk_cnt + 1;
+	end process spiclkcounter;
+
 end architecture rtl;

cores/flashrom-wb/flashrom_controller.vhd

@@ -16,7 +16,7 @@ entity flashrom_controller is
 		sync_stb          : in  std_logic; -- Synchronize current memory page with chip, only sampled when ready
 		load_stb          : in  std_logic; -- Load page into local buffer, only sampled when ready
 		status_update_stb : in  std_logic; -- Update status vector
-		status            : out std_logic_vector(31 downto 0); -- value of the status register (update using status_update_stb) 
+		status            : out std_logic_vector(7 downto 0); -- value of the status register (update using status_update_stb) 
 		info              : out std_logic_vector(31 downto 0); -- value of the information register (updated on reset)
 
 		-- Data IF		
@@ -40,7 +40,7 @@ architecture RTL of flashrom_controller is
 	constant max_dummy_bits       : integer := 16;
 	constant bootup_delay         : integer := 4000;
 
-	type state_t is (INIT, GETINFO, IDLE);
+	type state_t is (INIT, GETINFO, GETSTATUS, IDLE);
 	signal state : state_t;
 
 	signal spif_data_in_valid   : std_logic;
@@ -59,7 +59,7 @@ begin
 
 	flashrom_spi_inst : entity work.flashrom_spi
 		generic map(
-			clk_divider     => 2,
+			clk_divider     => 4,
 			max_word_length => spif_max_word_length,
 			max_dummy_bits  => max_dummy_bits)
 		port map(
@@ -135,9 +135,33 @@ begin
 						elsif spif_data_next = '1' then
 							temp_cnt := temp_cnt + 1;
 						end if;
-					when IDLE => null;
+					when IDLE =>
+						temp_cnt := 0;
+						if status_update_stb = '1' then
+							state    <= GETSTATUS;
+						end if;
+						if load_stb = '1' then --debug only
+							state  <= GETINFO;
+							end if;
+					when GETSTATUS =>
+						spif_data_in_length      <= 8; -- Other bits after OpCode are don't care, so just repeat OPC
+						spif_data_out_length     <= 8;
+						spif_data_out_dummy_bits <= 16;
+						spif_data_in_valid       <= '1';
+						spif_data_in             <= FLASHROM_COMMAND_GET_STATUS & padBits(spif_data_in, FLASHROM_COMMAND_GET_STATUS);
+						if spif_data_out_valid = '1' then
+							status <= spif_data_out(7 downto 0);
+							state  <= IDLE;
+						end if;
+						if temp_cnt = 3 then
+							spif_data_in_valid <= '0';
+						elsif spif_data_next = '1' then
+							temp_cnt := temp_cnt + 1;
+						end if;
 				end case;
 			end if;
 		end if;
 	end process flashrom_controller_p;
+
+	ready <= '1' when state = IDLE else '0';
 end architecture RTL;

cores/flashrom-wb/flashrom_pkg.vhd

@@ -5,6 +5,7 @@ use ieee.numeric_std.all;
 package flashrom_pkg is
 	constant FLASHROM_ADDR_WIDTH              : integer                      := 12;
 	constant FLASHROM_COMMAND_MANUFACTURER_ID : std_logic_vector(7 downto 0) := x"9F";
+	constant FLASHROM_COMMAND_GET_STATUS      : std_logic_vector(7 downto 0) := x"D7";
 
 	function padBits(target : std_logic_vector; other : std_logic_vector) return std_logic_vector;
 end package flashrom_pkg;