dataflash-model: some reformatting and removed timing checks

bench/OLDbench_flashrom_spi.vhd.old

@@ -1,92 +0,0 @@
-library ieee;
-use ieee.std_logic_1164.all;
-use ieee.numeric_std.all;
-
-entity bench_flashrom_spi is
-end entity bench_flashrom_spi;
-
-library design;
-use design.all;
-
-architecture RTL of bench_flashrom_spi is
-	signal clk            : std_logic;
-	signal spi_clk        : std_logic;
-	signal rst            : std_logic;
-	signal spi_si         : std_logic;
-	signal spi_so         : std_logic;
-	signal spi_sck        : std_logic;
-	signal spi_reset_n    : std_logic;
-	signal spi_cs_n       : std_logic;
-	signal spi_wp_n       : std_logic;
-	signal toSpiDataIn    : STD_LOGIC_VECTOR(7 DOWNTO 0);
-	signal toSpiWrite     : STD_LOGIC;
-	signal toSpiFull      : STD_LOGIC;
-	signal fromSpiDataOut : STD_LOGIC_VECTOR(7 DOWNTO 0);
-	signal fromSpiRead    : STD_LOGIC;
-	signal fromSpiEmpty   : STD_LOGIC;
-
-	procedure waitclk is
-	begin
-		wait until rising_edge(clk);
-	end procedure waitclk;
-
-	procedure strobe(signal s : out std_logic) is
-	begin
-		s <= '1';
-		waitclk;
-		s <= '0';
-		waitclk;
-	end procedure strobe;
-
-begin
-	flashrom_spi_inst : entity design.flashrom_spi
-		port map(
-			spi_clk        => spi_clk,
-			clk            => clk,
-			rst            => rst,
-			spi_si         => spi_si,
-			spi_so         => spi_so,
-			spi_sck        => spi_sck,
-			spi_reset_n    => spi_reset_n,
-			spi_cs_n       => spi_cs_n,
-			spi_wp_n       => spi_wp_n,
-			toSpiDataIn    => toSpiDataIn,
-			toSpiWrite     => toSpiWrite,
-			toSpiFull      => toSpiFull,
-			fromSpiDataOut => fromSpiDataOut,
-			fromSpiRead    => fromSpiRead,
-			fromSpiEmpty   => fromSpiEmpty
-		);
-
-	clock_driver : process
-		constant period : time := 10 ns;
-	begin
-		clk <= '0';
-		wait for period / 2;
-		clk <= '1';
-		wait for period / 2;
-	end process clock_driver;
-	spi_clk <= clk;
-
-	test : process is
-	begin
-		spi_so      <= '0';
-		rst         <= '1';
-		toSpiDataIn <= (others => '0');
-		toSpiWrite  <= '0';
-		fromSpiRead <= '0';
-
-		wait for 40 ns;
-
-		rst <= '0';
-		wait for 20 ns;
-		toSpiDataIn  <=  x"55";
-		strobe(toSpiWrite);
-		waitclk;
-		toSpiDataIn  <=  x"AA";
-		strobe(toSpiWrite);
-		
-		wait;
-	end process test;
-
-end architecture RTL;

bench/bench_flashrom_controller.vhd

@@ -49,8 +49,26 @@ architecture rtl of bench_flashrom_controller is
 	signal spi_reset_n       : std_logic;
 	signal spi_cs_n          : std_logic;
 	signal spi_wp_n          : std_logic;
+	signal spi_busy          : std_logic;
 
 begin
+	DataFlash_inst : entity work.DataFlash
+		generic map(
+			flashmemory     => "devicemodels/memory.txt",
+			Rapid_interface => true,
+			fsck            => 66,
+			DEVICE          => "AT45DB011D",
+			Tsck            => 13.6 ns)
+		port map(
+			SI     => spi_si,
+			CSB    => spi_cs_n,
+			SCK    => spi_sck,
+			WPB    => spi_wp_n,
+			RESETB => spi_reset_n,
+			SO     => spi_so,
+			RDYBSY => spi_busy
+		);
+
 	flashrom_controller_inst : entity design.flashrom_controller
 		port map(
 			clk               => clk,
@@ -89,7 +107,7 @@ begin
 	bench : process is
 	begin
 		rst <= '1';
-		clr  <= '0';
+		clr <= '0';
 		wait for 10 ns * 2;
 		wait until (rising_edge(clk));
 		rst <= '0';
@@ -102,98 +120,4 @@ begin
 		wait;
 	end process bench;
 
-	
-	
-	-- debugging only!
-	spi_so_p : process is
-		procedure spitx(constant value : std_logic) is
-		begin
-			spi_so <= value;
-			wait until rising_edge(spi_sck);
-		end procedure spitx;
-	begin
-		spi_so <= '0';
-		wait until rising_edge(spi_sck);
-		wait until rising_edge(spi_sck);
-
-		
-		-- 0x0 (dummy)
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		-- INFO FOO: 0x1F
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('1');
-		spitx('1');
-		spitx('1');
-		spitx('1');
-		spitx('1');
-		-- 
-		spitx('0');
-		spitx('0');
-		spitx('1');
-		spitx('0');
-		spitx('0');
-		spitx('1');
-		spitx('1');
-		spitx('1');
-		-- 
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('1');
-		-- 
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		
-		
-		
-		
-		-- 0x88
-		spitx('1');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('1');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		-- 0x44
-		spitx('0');
-		spitx('1');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('1');
-		spitx('0');
-		spitx('0');
-		-- 0x22
-		spitx('0');
-		spitx('0');
-		spitx('1');
-		spitx('0');
-		spitx('0');
-		spitx('0');
-		spitx('1');
-		spitx('0');
-
-		wait;
-	end process spi_so_p;
 end architecture rtl;

cores/flashrom-wb/flashrom_controller.vhd

@@ -38,6 +38,7 @@ end entity flashrom_controller;
 architecture RTL of flashrom_controller is
 	constant spif_max_word_length : integer := 32;
 	constant max_dummy_bits       : integer := 16;
+	constant bootup_delay         : integer := 4000;
 
 	type state_t is (INIT, GETINFO, IDLE);
 	signal state : state_t;
@@ -80,6 +81,8 @@ begin
 			transmission_active => spif_transmission_active);
 
 	flashrom_controller_p : process(clk, rst) is
+		variable temp_cnt : integer range 0 to bootup_delay;
+
 		procedure default_state is
 		begin
 			spi_reset_n        <= '1';
@@ -97,6 +100,8 @@ begin
 			spif_data_in_length      <= 0;
 			spif_data_out_length     <= 0;
 			spif_data_out_dummy_bits <= 0;
+
+			temp_cnt := 0;
 		end procedure reset_state;
 	begin
 		if rst = '1' then
@@ -109,20 +114,28 @@ begin
 				case state is
 					when INIT =>
 						words_sent <= 0;
-						state      <= GETINFO;
+						if temp_cnt = bootup_delay then
+							temp_cnt := 0;
+							state    <= GETINFO;
+						else
+							temp_cnt := temp_cnt + 1;
+						end if;
 					when GETINFO =>
-						spif_data_in_length      <= 16; -- Other bits after OpCode are don't care, so just repeat OPC
+						spif_data_in_length      <= 8; -- Other bits after OpCode are don't care, so just repeat OPC
 						spif_data_out_length     <= 32;
 						spif_data_out_dummy_bits <= 8;
 						spif_data_in_valid       <= '1';
 						spif_data_in             <= FLASHROM_COMMAND_MANUFACTURER_ID & padBits(spif_data_in, FLASHROM_COMMAND_MANUFACTURER_ID);
 						if spif_data_out_valid = '1' then
-							info               <= spif_data_out;
-							state              <= IDLE;
-							spif_data_in_valid <= '0';
+							info  <= spif_data_out;
+							state <= IDLE;
 						end if;
-					when IDLE =>
-						null;
+						if temp_cnt = 5 then
+							spif_data_in_valid <= '0';
+						elsif spif_data_next = '1' then
+							temp_cnt := temp_cnt + 1;
+						end if;
+					when IDLE => null;
 				end case;
 			end if;
 		end if;

cores/flashrom-wb/flashrom_spi.vhd

@@ -43,6 +43,7 @@ architecture RTL of flashrom_spi is
 	signal data_out_length_i : integer range 0 to max_word_length;
 	signal delayCycle        : std_logic;
 	signal oneBitRead        : std_logic;
+	signal pseudoEdge        : boolean;
 	signal dummy_passed      : boolean;
 begin
 	toSpi : process(clk, rst) is
@@ -50,6 +51,7 @@ begin
 		begin
 			data_next      <= '0';
 			data_out_valid <= '0';
+			pseudoEdge     <= false;
 		end procedure default_state;
 
 		procedure reset_state is
@@ -85,11 +87,15 @@ begin
 							bitCounter       <= 0;
 							bitCounterIn     <= 0;
 							data_in_length_i <= 0;
+							pseudoEdge  <= true;
 						end if;
+						ckDiv <= 0;
 					when TX =>
-						if ckDiv = clk_divider - 2 then
-							spi_sck <= not spi_sck;
-							if spi_sck = '0' then -- rising edge
+						if ckDiv = clk_divider - 2 or pseudoEdge then
+							if not pseudoEdge then
+								spi_sck <= not spi_sck;
+							end if;
+							if spi_sck = '1' or pseudoEdge then -- falling edge -> provide data
 								if bitCounter = data_in_length_i then
 									bitCounter <= 0;
 									if data_in_valid = '1' then
@@ -104,7 +110,7 @@ begin
 									bitCounter <= bitCounter + 1;
 									shiftreg   <= shiftreg(shiftreg'high - 1 downto 0) & '0';
 								end if;
-							else        -- spi_sck = '1' (falling edge)
+							--else        -- spi_sck = '1' (falling edge)
 								data_out <= data_out(data_out'high - 1 downto 0) & spi_so;
 
 								if bitCounterIn = 0 then