fpga/trashernet
1
0
Fork 0
Code Issues 7 Pull Requests 2 Releases 2 Wiki Activity
Trashernet is a very trashy Ethernet stack for FPGAs written in VHDL aiming to cover all OSI layers, including physical!
33 Commits 8 Branches 2 Tags 449 KiB
VHDL 96.6%
Python 3%
Makefile 0.3%
723de2b36c
Go to file
Markus Koch 723de2b36c wip: eth
2021-09-26 18:21:49 +02:00
bench mac: Refactor to use records for the application interface 2021-09-25 16:18:02 +02:00
doc doc: Add Trashernet logo 2021-09-25 20:28:43 +02:00
trashernet wip: eth 2021-09-26 18:21:49 +02:00
README.MD doc: Add Trashernet logo 2021-09-25 20:28:43 +02:00

README.MD

Trashernet

Trashernet Logo

Trashernet is a very trashy Ethernet stack for FPGAs written in VHDL aiming to cover all OSI layers:

  • Layer 1, Physical: trashernet_phy
  • Layer 2, Data link: trashernet_mac

When writing it, the following were the main design philosophies:

  1. Standards are nice and all, but this, it just needs to work.
  2. Hardware is expensive, LOC are not. So let's do everything we can inside the FPGA.
  3. If there's a feature that feels optional even though it isn't, it is. See 1. if in doubt.

IMPORTANT: This code (and HW suggestions) violate the Ethernet standard in many ways. Do not use in proper (especially commercial) products.

Hardware

TBD. TL;DR:

  • RX: Use resistors behind Ethernet magnetics to reduce Ethernet RX voltage levels (0 +-2.5V) to LVPECL voltage levels (1.65V +-400mV). Or LVDS if your FPGA can't handle LVPECL.
  • TX: Meh, a series current limiting resistor is good enough.

License

This Source Code Form is subject to the terms of the Mozilla Public License, v. 2.0.